Jump to content

Care package from Esslingers!

khunter

By khunter
in Tools & Equipment

 Share

Recommended Posts

khunter WRT Addict

khunter

Posted
Posted

So my order arrived today from Esslingers, and the main thing was a new set of screwdrivers. I was skeptical at the thought of a set like this for under $100 but all I can say is WOW! Very solid base that rotates on ball bearings, hefty weight to the screwdrivers themselves, and a full set of replacement blades as well. Also scored a new movement holder, some emery sticks, and a couple other odds and ends. A new workmat too, this one can be wiped down and is padded.

The movement pictured is my new project, an Illinois 19j Bunn, I think I'll document the process in the walk through section. 

2018-02-03 12.33.11.jpg

2018-02-03 12.32.38.jpg

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Waggy
      Cleaning solution clarification

      By Waggy · Posted

      Just to add to what @Neverenoughwatches says, the impulse jewel on the balance wheel is also held in by shellac, so avoid exposing the assembly to IPA as well - as stated the one-dip and generic tetrachloroethylene equivalent is safe with shellac so you can use this for your pallet fork and balance assembly. I agree, but worth noting that IPA readily soaks up water, even from the atmosphere: "IPA exposed to the air will absorb moisture rapidly until it reaches an equilibrium value of 65% IPA to 35% water." So you need to refresh it regularly.     
    • Neverenoughwatches
      Pivot Gauge

      By Neverenoughwatches · Posted

      The width is otherwise known as mainspring height and strength as thickness for us more modern guys.
    • RichardHarris123
      Pivot Gauge

      By RichardHarris123 · Posted

      I've remembered something I had forgotten.  I've come across Dennison before but forgot all about it as I'm never going to use the units.  Maybe we should start a  thread on obscure units of measurement. 
    • Waggy
      Pivot Gauge

      By Waggy · Posted

      Learned a new thing today! 🤓 Looked this up and found this informative document: Watkins-MainspringGauges.pdf
    • Neverenoughwatches
      Cleaning solution clarification

      By Neverenoughwatches · Posted

      Correct one dip is expensive when the chemical is purchased as " one dip " which is why it is mostly reserved for these two small parts as far as information tells us it is mostly tetrachloroethylene. I use it bought as perchloroethyl used in dry cleaning processes, i cant say I'm overimpressed with it though it appears to me to be shellac safe. What may be a better solution for hairsprings is a high lab grade of pure benzine.  IPA is mostly used as a rinse and water displacer and yes it does have the potential to dissolve shellac, personally i would not buy anything that has significant water dilution so 99.9% IPA is the way to go. And lastly the part you are cleaning dictates your choice of cleaning brush, delicate parts like a hairspring requires the finest artist's brush you can find. Plates and bridges can take a little more scrubbing, but always check to make sure the surface is being unharmed. And dont forget a stick of tip benzine soaked correctly shaped pegwood is your mate set up for cleaning dirty jewels and removing stubborn dried up lubrication. 
×
×
  • Create New...