Jump to content

Fake Military Watches?


Recommended Posts

On 8/31/2019 at 8:47 PM, HSL said:

If you look in the book "German Military Timepieces of World War II Volume 3 German Army/Waffen-SS" by Ulric of England and
on Page 33 you can see how a genuine should look like, Helvetia made a similar watch before like in the early 30's and after the war so they became popular to sell from countries like Ukraine where they just popped in a Helvetia caliber 82A or similar in a fake case.

Germans are known for their efficiency and during a raging war they wouldn´t care to engrave the movement with the amount of jewels and so on the barrels and thats why the most confirmed genuine are just blank inside with just 82A stamped on the side; while one from the 30's would have some text and even some serial numbers on the train bridge. All the casebacks in the book has the 3190 engraved in them and so do the fakes, but the most genuine has a CB mark stamped on the inside.

The things to be aware of here is the serial number on the trainbridge, looks like a 6-9 number serial, what you would expect on a pre war (81-24) movement.
The movement mostly provided during the WW2 was the 82A-24. On this specimen you also can see the text General Watch Co , Helvetia's parent company on the movement which I think never occures on the real deal.

The D 15004 H looks a bit familiar to a case I bought from the bay in 2017 just for reseach purposes, think the serial was D 15009 H or something like that.
But who knows progress in identifying these gems might have progressed but I wold want to see the inside of the back and a better closeup of the movement before buying it.

Hello all,

I know this is an old thread but just in case someone stumbles across it while trying to authenticate a DH Helvetia watch I thought I'd update it quickly.

I have studies Helvetia DH watches extensively and I agree that the movement is an earlier one, probably from the early 1930s, as you say the DH movements are normally plain, often only marked Helvetia.

The dial, hands, case and numbering are all correct however, I have one exactly the same, there were a few variations of Helvetia DH watches.

Have a look at my page here for more info:

https://www.helvetiahistory.co.uk/german-military-dh-watches

Thanks.

Carl

 

Link to comment
Share on other sites

On 9/1/2019 at 9:19 AM, HSL said:

Just as a fun fact in the same theme, there was a bunch of cases roaming around for a while. I'm sure they are contemorary WW2 stuff but probably never used. I've seen these NOS cases with Helvetia 800C movements in them.
I guess they seem to be more accepted these days but is it a genuine WW2 watch? Can one just pop in a movement in them and say they just made a restauration, after all the cases doesn't meet any specs setup as a military watch. Maybe they needed a coctail watch for nicer receptions?

 

IMG_20190901_095206.thumb.jpg.0529075531ea7f8099b3c53cd38c4193.jpg 

IMG_20190901_095143.thumb.jpg.9aa953b16a5decf50f0e7c3d7ef8e576.jpg

IMG_20190901_095234.thumb.jpg.a81a6e2a92d89b46562507280f7d2fdd.jpg

I also have a page on Helvetia DIH watches and these NOS cases:

https://www.helvetiahistory.co.uk/german-military-dih-watches

Thanks. Carl.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • So I found what I believe is the setting lever screw! Am I right in thinking the screw next to the click is the correct one for the setting lever? However if it is, it doesn't fit in the hole which I believe is for it! I can get the lever to sit nicely on the stem and line up with a hole, but the screw only goes as far as the shoulder and stops. It's as though the hole is too small! The dial side has been disassembled by the way, the other wheels are in my tray
    • When faced with say a pocket watch bridge which is cracked, silver soldering to repair is often the only option (hopefully someone wasn't there before hand with soft solder). I can generally do this succesfully and tidily with a small torch and miniscule pieces of silver solder, but on parts which were mercury amalgam gilded the heat can have have a deleterious effect on the finish.   I keep wondering if there's a good way to refinish these - and despite having the needful items would rather avoid using the mercury process.   In the past for electronic work I've gold plated PCBs but this involved gold potassium cyanide solution, which also doesn't realy belong at home. I've read that there are now safer alternatives but couldn't find more detail (and importantly how similar are the results to amalgam gilding, since I wouldn't want to refinish the whole watch). Pointers would be very welcome (and yes, I know solutions containing gold won't be cheap!) Alan
    • The first one is an Unruh max stake for pushing out staffs
    • Ok so with the great answers for my previous question may I ask what these two attachments are used for. The one with the red knob is I assume used for hand setting the seconds hand? Jon      
    • According to Cousins site I need to look at document G22 as I think I need an ATGB at 304 but I cant find this size in G22 doc. The last thing I want to do is order the wrong one😳  Unless I cant see the wood for the trees 😆 I could be looking at the wrong style, I assume its classed as Round plastic Armed  https://www.cousinsuk.com/product/wide-ring-gold-atgb
×
×
  • Create New...