Jump to content

replacement movement for a RotaryGS08103/06

Greybeard

By Greybeard
in Watch Repairs Help & Advice

 Share

Recommended Posts

Greybeard New Member

Greybeard

Posted
Posted

I have a rotary watch GSO810306 and the movement needs replacing can anyone help with what I need to be looking for I am very new to watches as a hobby and have experienced the tiny cog spinning out the the tweezers to be lost for ever syndrome  I think it is an original movement it has swiss made and isatron 228 written on it thanks in advance for any advice given

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted

ISA 228/130 or /1332, you should measure the height to know. Start Time Supply has it, but they are in the US, don't sell to the public, so you'll have to look.

Next time, to be on the safe side, post a pic on what you work on. Also, there is a forum section where most new members like to introduce themselves before asking questions.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • rjenkinsgb
      Questions about my Bravingtons Renown Mantel Clock

      By rjenkinsgb · Posted

      Off topic, but that just brought back an old memory! My mother once told me about a minor incident as a child (born 1917, so 1920s, at a guess). She used to use "Fish glue" for a hobby - an apparently smelly glue that had to be heated to be usable - and to heat it gently, she had to stand the tin in the kettle.   One day someone filled the kettle without seeing the glue tin.. The tea tasted of fish for some time afterwards!  
    • Neverenoughwatches
      Balance cock stud screw

      By Neverenoughwatches · Posted

      As Richard said, this is a really old school trick for joinery.  Cut i strip of paper, might need to be watch paper  around 1 " x 1/2" lay it over a staking block then press the stud screw into and through the edge of the paper upto the head of the screw. You probably wont even need to pull the paper away the head will pull itself through.
    • Neverenoughwatches
      Leaving the forum for a while.

      By Neverenoughwatches · Posted

      Thanks Jon, my mum is getting there day by day, so strong and determined, they dont make em like this anymore 🙂 Old folk are so amazing,  my mum used to love her golf, she didn't stop playing until she was 70 . Enjoy your trip and your golf.
    • ooteenie
      Waltham 6/0 d winding stem

      By ooteenie · Posted

      Hello,  i am looking to source a winding stem (winding arbor) for a waltham 6/0 d movement. I have found some that claim to fit 6/0, 6/0s, 6/0b etc and somealso claim they will also fit the d as well. The d does have hacking which is driven by the stem seating completely. Given some of the costs of these, i was hoping someone would know of any interchangeability with a source, or know a source where a confirmed 6/0 d stem can be had. I am in the US so a US dealer is best.    thanks in advance. 
    • rehajm
      Leaving the forum for a while.

      By rehajm · Posted

      So great to see and hear- your mum looks great! …my mil had a stroke last summer in the golf course parking lot. I’m flying out tomorrow to visit and play golf. she’s ornery because she can’t get off the tee but I hear she makes up for it on the greens since she’s been putting since a week after her stroke 🧐…
×
×
  • Create New...