Setting Hands On 7750

[Stevo2022]

I'm a newb who is a bit late to the party here. I've purchased a Horia movement holder clone. And I'm aware that the support pins for the SW500 chronograph jewels can be different sizes.

I purchased 0.8mm pins with the holder. These were all that were available at the time. Will these be the right size?

Can someone shed a little light on this for me please?

Edited yesterday at 02:38 AM by Stevo2022
Error

[tomh207]

@Stevo2022

you are unlikely to get a response from these members as they haven’t logged in for a few years. I think you will do better starting your own thread, more people will see it.

 

Tom

[Mark]

27 minutes ago, tomh207 said:

@Stevo2022

you are unlikely to get a response from these members as they haven’t logged in for a few years. I think you will do better starting your own thread, more people will see it.

 

Tom

Ive split this into a new topic.

[AndyGSi]

Looking at the genuine Bergeon holder I expect the 0.8mm will be too big.

Edit

You should be able to check with the pins out of the
holder if they pass through the surround to the jewel.

Edited yesterday at 09:23 AM by AndyGSi

[Stevo2022]

@Mark Thanks for letting me know. I'll start a new thread.

@AndyGSi Thanks too for that tip. I might be able to turn them down if need be. 

 

@Mark Sorry, I don't get what you mean by "I've split this into a new topic."?

[RichardHarris123]

Mark, means he has made this a separate post, he has split it from the old post. You don't need to start a new thread now. 

[Mark]

Just now, RichardHarris123 said:

Mark, means he has made this a separate post, he has split it from the old post. You don't need to start a new thread now. 

Exactly.

3 hours ago, Stevo2022 said:

@Mark Thanks for letting me know. I'll start a new thread.

@Mark Sorry, I don't get what you mean by "I've split this into a new topic."?

As Richard says, all good - I helped you by splitting your comment made on an old topic into a new topic of your own in order to help with clarity

Welcome to the forum by the way