Watch stem for a UT 42

[SteveMorris51]

I am servicing a Vogue 17j automatic watch that has a UT 42 movement.  I'm missing the winding stem. How can I get a new one? The movement came out of the case from the front.

[SteveMorris51]

I should add that the UT 42 movement has the auto winding type of the Seiko 5. 

[caseback]

The winding stem of a Seiko 6601A should fit according to ranfft:

 

 

Edited November 6, 2024 by caseback

[AndyGSi]

Are you 100% sure that it's a front loader as I can't see any obvious stem release on the front.

[caseback]

25 minutes ago, AndyGSi said:

Are you 100% sure that it's a front loader as I can't see any obvious stem release on the front.

Could be it needs a split stem?

[AndyGSi]

15 minutes ago, caseback said:

Could be it needs a split stem?

I thought that but can't find any reference for a split stem on the UT 42.

Edit

Just realised the movement probably isn't in the correct orientation in the photo so this could be the front stem release.

 

Edited November 6, 2024 by AndyGSi

[SteveMorris51]

Thanks guys for the quick reply.  Especially you Caseback. The movement come out the front, but the back also comes off to release the stem. I'll order that stem now.