Jump to content

Mickey Mouse custom case?

LittleWatchShop
 Share

Recommended Posts

LittleWatchShop Distinguished Member

LittleWatchShop

Posted
Posted

Here of late, I am running a real Mickey Mouse Operation!!

After fixing a MM watch broken case with a donor, I have an extra movement left over with no case.  So I had this crazy idea to make a MM case.  Lots of details to work out, but here is the early stage.  I don't know if I want to make it a pendant watch, or put it on a stand.  That is TBD.

One challenging issue is how to make the bezel and attach it firmly.  3D printing has its limitations.

 

image.png.1e81dd0e605a591326d7c2c492c7f7e6.png

  • Like 2
tomh207 Distinguished Member

tomh207

Posted
Posted
2 hours ago, LittleWatchShop said:

Here of late, I am running a real Mickey Mouse Operation!!

After fixing a MM watch broken case with a donor, I have an extra movement left over with no case.  So I had this crazy idea to make a MM case.  Lots of details to work out, but here is the early stage.  I don't know if I want to make it a pendant watch, or put it on a stand.  That is TBD.

One challenging issue is how to make the bezel and attach it firmly.  3D printing has its limitations.

 

image.png.1e81dd0e605a591326d7c2c492c7f7e6.png

Something in metal with one of your several lathes?

 

Tom

  • Like 1
Karon Member

Karon

Posted
Posted

I'm currently working on a custom Mickey Mouse case project that I got from a recent repair. I used a donor to repair the case of my broken MM watch and I had an extra movement and the case was gone. This gave us the idea to design a custom Mickey Mouse case, but there are still many details to consider in the early stages. Whether it will be a pendant watch or a grand clock is yet to be decided. One of the challenges I face is finding a good way to manufacture and securely attach the bezel given the limitations of 3D printing.

LittleWatchShop Distinguished Member

LittleWatchShop

Posted
  • Author
Posted
2 hours ago, Karon said:

limitations of 3D printing

Indeed. At these small dimensions, 3D printing is very crude.

My bezel here uses a glass crystal and is friction fit. Good for desktop, but not for wearing.

  • 1 month later...
LittleWatchShop Distinguished Member

LittleWatchShop

Posted
  • Author
Posted
32 minutes ago, RichardHarris123 said:

Not into Mickey Mouse or Mickey Mouse watches but that's cool. 

Me either really, but I had to fix a watch for a friend and needed a donor.  Got a lot of five MMs in the deal.  Had an orphaned movement.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • tcabot
      Looking to try servicing an old movement

      By tcabot · Posted

      Thank you very much for being extremely helpful and patient. I know a guy who can 3dprint, I can design a spacer I guess. For cleaning with the lighter fluid, is it entirely done by hand, or do I need a jig (spinner?). Any informative links appreciated! Would you have any suggestions for the app? I'll test it on my Slava.
    • Simeon
      9020 or HP500? Which would I get the most use out of?

      By Simeon · Posted

      I did wonder about the feasibility of mixing two oils. I am guessing that 9010 / 9020 or HP500 / HP1300 would be a better mix than 9010 / HPxx. Some people might think that was heresy but I guess the only consequence is that you might have to service the movement again if you got a poor result. 
    • dnhb
      Loose roller table

      By dnhb · Posted

      Believe me: I am aware how fortunate I am.
    • LittleWatchShop
      Looking to try servicing an old movement

      By LittleWatchShop · Posted

      Yes, however, as you are just starting out, you can progress using Ronsonol lighter fluid (or equiv) to clean.  Use pegwood to clean all pivot bearings. Yes.  Some disagree with me.  I have many hundreds of dollars invested in multiple time graphers and vintage timing machines.  The phone app is just fine for a beginner. Probably just needs a good cleaning. My SWAG, is slim to none unless you own a 3D printer and can design and print a spacer Here is a re-cased Mickey Mouse watch I made using 3D printer...lol!!
    • mbwatch
      Looking to try servicing an old movement

      By mbwatch · Posted

      Chances of fitting that movement into a modern case with pleasing results are not good unfortunately. Dial size, pinion height, the position of the stem relative to the thickness of the movement all play a role, so cases made for a specific movement are really only workable for that movement. If you have a lot of skill in 3D modeling you might find a way to make it work, but it would be a significant challenge. A case made for an ST36 would be gigantic in relation to the Benrus movement. A case made for something like a Seiko NH35 would be closer to a workable diameter, but most of those modern cases are made for automatic movements that are much thicker than vintage hand wound movements.
×
×
  • Create New...