-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
-
Posts
-
By Willem1961 · Posted
The printing material is TPU my next step is to print them in a more rubber like TPU material and instead off using the computer drawing me gonna try a 3D scan from a original strap and see how that works out. -
Great work, what material are you printing with? -
By rossjackson01 · Posted
The more I get into this hobby. The more I am amazed at the standard of those preceding. Amazing people and amazing skills. We wear their history on our wrists. -
Hi All, Just wanted to say thanks to everyone who has contributed a reply to my original question. I’ve learnt a lot and I’m much clearer about the options for replacing the mainspring in my project. It’s been a very fruitful discussion. Cheers, John -
By Willem1961 · Posted
Hello WRT members I started a project 4years ago printing straps for seiko model 5M42-0E69. This because the strap wasn’t produced anymore and i needed a strap for my father’s watch that come to my possession. I found someone who was willing to make a computer drawing and than he started printing and worked out well. To build up the metal caps you need to have some patience but it worked. He fiets printed a prototype in red. With some adjustments such as the heath off the printer he started to print them in the original color black. Sorry these are original SLQ003 straps!!! This is a black printed strap By the way the slq003 strap and the 5M42-0E60/69 strap are the same only the metal caps from the slq are a bit more robustly. Than I came to the idea to experiment with colors.
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.