Jump to content

Rolex 6694 Bracelet in need of repair

BrehmerR
 Share

Recommended Posts

BrehmerR Watch Enthusiast

BrehmerR

Posted
Posted

So I was recently able to purchase a really nice, fully original oysterdate precision, case ref. 6694 with a steel bracelet. I bought it as a non runner and I have already ordered a new case tube, gaskets and crystal since they were all in desperate need of replacement. The dial is in 95% perfect condition and the hands in ok condition with some slight damages to the finish unfortunately. I got it for a really good price though... about 1700 USD. 

The real issue lies within the bracelet however. As shown in the pictures, one rivet has broken off that keeps the end link fastened to the bracelet. some rivets are badly bent and the bracelet is in overall pretty sad shape. I have absolutely zero experience in repairing bracelets even though I have repaired hundreds of watches /: Is there anyone who can tell me what can be done here? Do i need to make new rivets somehow? Can I get some sort of faux rivets instead and can I bend up the hollow bracelet links in order to replace some bent rivets or anything alike. Really, as much information as possible on different option of what to do would be immensely appreciated. 
Thanks(:

 

IMG-0832.jpg

IMG-0831.jpg

IMG-0830.jpg

IMG-0828.jpg

BrehmerR Watch Enthusiast

BrehmerR

Posted
  • Author
Posted
5 hours ago, gbyleveldt said:

Not sure how much you feel like getting into “manufacturing”, but I came across this the other day as I have some Tag bracelets that need disassembly of permanent links.

https://www.rolliworks.com/post/oyster-bracelet-too-long-removal-of-permanent-link-explained

Not exactly the same bracelet, but the principle of what’s involved is explained. I think it’s fascinating.

That was something in the line of what I was thinking so it was nice to have a read at that article. It seemed like a significantly more elementary process than I had imagined. 
I will look into that method but I will not start until I have received some more advice. I really don't want to mess this bracelet up for obvious reasons...

Anyways, super big thanks for that help(:
It rejoices me that there are so many helpful people here(:

BrehmerR Watch Enthusiast

BrehmerR

Posted
  • Author
Posted
1 hour ago, tomh207 said:

It might be worth getting a selection like this and try first. I have used these to fix a fair few clasps on bracelets.

https://www.cousinsuk.com/category/fittings-pressure-bars-rivet-ends
 

Tom

That is precisely spot on what I was looking for! I was looking around on cousins but was only able to find metal pins which you then would have to rivet yourself. The biggest problem is that I don't have the machinery to polish the rivets after so this is perfect.

Big thanks(:

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • BobG
      Gruen 330 balance complete

      By BobG · Posted

      Hi All, I’m having a hard time finding a balance assembly or even a working donor movement for a Gruen 330.  Any leads appreciated.   Gruen doesn’t stamp the caliber number of the movement but lust in the case back.   
    • Neverenoughwatches
      Parts sourcing for FHF 180 movement

      By Neverenoughwatches · Posted

      Why do you think this is Fontainemelon ?  The balance staff you will need to source separately.  But first it's important to accurately identify what you have there. Research Ebauches Sa, see who was in group, to find the brand that made this movement. 
    • donutdan
      Parts sourcing for FHF 180 movement

      By donutdan · Posted

      Hi Watchrepairtalk, I have some questions about part sourcing I was hoping someone here might be able to help with. I'm working on an FHF 180 movement with a broken balance staff, broken regulator pins, and damaged cap jewels (both top and bottom). Some Googling says that this is similar to other FHF calibers like 150s, 160s, 180s and so on but I can't figure out what the functional difference is between these movements.  Is there any reason I wouldn't be able to acquire a donor FHF 150 or similar (with no shock protection) and use parts from that or would it be smarter to source replacements individually? Also are there any sources someone could recommend to get bulk cap jewels like this? Thank you for the help!
    • Nucejoe
      Greetings from Whidbey Island.

      By Nucejoe · Posted

      Hello and welcome to the WRT forum.
    • JohnR725
      A lathe with indexing that won't break the bank?

      By JohnR725 · Posted

      interesting video nice to see the machine what it can do now I wonder what it costs and I'm sure it's not in my budget. Plus the video brought up questions but the website below answers the questions? What was bothering me was the size of his machine 4 mm because I thought it was bigger than that? But then it occurred to me that maybe they had variations it looks like four, seven and 10. With the seven and 10 being the best because way more tool positions in way more rotating tools. Although I bet you all the rotating tools are probably separate cost https://www.tornos.com/en/content/swissnano   Then as we been talking about Sherline. Just so that everyone's aware of this they have another division their industrial division where you can buy bits and pieces. I have a link below that shows that just in case you don't want to have the entire machine you just need bits and pieces. https://www.sherline.com/product-category/industrial-products-division/   Let's see what we can do with the concept I explained up above and bits and pieces. For one thing you can make a really tiny gear very tiny like perhaps you're going to make a watch. Then another version the center part is not separate it is all machined from one piece. Then fills gear cutting machines have gone through multiple of evolutions. A lot of it based on what he wanted to make like he was going to make a watch unfortunately eyesight issues have prevented that. Another reason why you should start projects like this much sooner when your eyesight is really good or perhaps start on watches first and then move the clocks then local we have from the industrial division? Looks like two separate motors and heads. Then it's hard to see but this entire thing is built on top of a much larger milling machine as a larger milling machine gave a very solid platform to build everything.   Then like everything else that had multiple generations are versions the indexing went through of course variations like above is one version and the one below was the last version. Now the version below I mentioned that previously and somewhere in the beginning to discussion and somebody else had one in their picture. As it is a really nice precision indexing. Then I wasn't sure if I had a the watch photos here is his unfinished watch. No he wasn't going to make a simple watch like none of his clocks were simply either what would be the challenge and that.    
×
×
  • Create New...