-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
Posts
-
By nevenbekriev · Posted
Hi there, Demonstrated in the video only shows that the movement will not (auto)start when the hack lever is returned back. This can be due to different things (bad condition of the movement, wrong zero position of balance(bear error)...), but will not explain sudden stops at all, if the hack function has not been engaged. You can remove the hack lever if You need to be sure. -
Hi folks, This is a bit of a long shot, but if anyone has a recommendation for a shop to service my dad's Howard Miller long case clock in Edmonton, Alberta, Canada, I'd appreciate the reference. Cheers! --Rick
-
That makes good sense...... thinking of a good name..... The Cost Conscious Challenge Operation Skinflint Cheapskate Challenge Polish The 💩 ??
-
404 Club Part Deux, 1010 Club Or to take the value out of the equation (as inflation will eventually make the value limit go higher): Budget Watch Club, Bargain Watch Club, Dirt Cheap Club, Club Thrifty
-
I'm still waiting for a decent jewelers screw driver set I ordered one from england, so far the ones available are too fat, These screws are tiny, I have a couple broken watches I think I can swap parts, I got an good Pocket watch to try and clean and oil. we'll see. Having a blast though. People sell boxes of watches they don't have time to mess with, it's a treasure hunt 🙂 When I have to drive 50 mi. and pay $5 to get a battery replaced I see a market, if I get good enough. (some replacements really suck, and just when I think I'm good I slip and scratch a back) and I need more tools.
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.