Jump to content

sellitta sw200-1 eta 2824-2 parts interchangeability


Recommended Posts

I have an old 2824-2 which needs a couple of parts. Whilst it is in parts I thought it might be worth changing the barrel bridge for the Sellitta version with the extra jewel. Does anyone know if the parts for these two movements are actually interchangeable or do they just look the same. This would solve the problem with eta not being keen on supplying parts these days.

 

Phil

Link to comment
Share on other sites

I have found this for you.

Note that the steady pins are on the bridge with ETA, but are on the plate with Sellita. These parts are not interchangeable and none of the bridges are.

The info is in this word doc. For some reason I can't just post the photo, its in a funny format.

 

Doc1.docx

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • My favorite is my first mechanical watch.  I received it as a present when I worked in Japan about 20 years ago (don't remember the exact year but it was between 2004 and 2006). It is a Seiko SAGN011 with the 4S27 movement and a titanium bracelet.  I unfortunately dropped it in a way that made it stop working.  I sent it to Seiko US for repair, they sent it to Japan without looking at it and the service and repair ended up costing $610 By the way one link in the bracelet is damaged and needs replacement and I have no idea how to find one.  If any of you know how it can be done it will avoid another expensive repair, right now my wife has a trip to Japan planned for the fall and we are thinking about having it repaired then. It is exactly like this one https://wholesaleshop.ru/product/134848968779
    • Yeah I have the cheap one.  But I think you are correct and they are reversible I hadn't tried turning them other but I see it in the picture (I am at work can't check the actual holders right now). I'll probably get better one at some point but right now there has been a lot of tools to buy to start so I am cheaping out on some things.  I am quite happy that I did get a microscope because working with a loupe was just not working for me at all. next big stuff coming is ultrasonic machine, cleaning solution (99.9% IPA and Naphta) and lubricant (Moebius 8000 and Molikote DX for now).  
    • I’ll be getting into them sometime this year, my grandfather’s pocket watch was one of the reasons I got into this rabbit hole. Funny enough last week whilst I was replacing a couple of batteries for the missus she done the old “I just remembered something “ and wandered off. A couple of minutes later she hand me her father’s and grandfather’s pocket watches. Apparently she got them from her brother years ag because I was into watches and thought I might like them. Not looking forward to looking at her grandmothers watch, solid gold and the head is pretty much the size of my little finger nail.   Tom
    • Hi Murks, I would just measure the old spring and order a generic one closest I can to size. Especially on thickness and height, length doesn’t matter so much as long as the difference isn’t huge.   Tom
    • As it’s Seiko have you tried a search in cousinsuk crystal section using the case reference?   Tom Had a Quick Look, 310W13GN00 looks like the part number you need but every listing I have found is a discontinued line. You might want to measure up the one you have and look through the sternkruetz catalog, here is a download link http://www.sternkreuz.de/accordion/assets/Sternkreuz_Gesamtkatalog G22.pdf   Tom
×
×
  • Create New...