Search the Community
Showing results for tags 'pusher'.
Found 3 results
-
Have got a Anonimo Zulu Time (Soprod C115) for repair. The movement spacer (which is also holding the movement down) is blocked by the 24hour pusher pin (just above 2 O'clock). Its a screw down and I need a tool to first take it out before I can remove the movement holder after which the movement can come out. Need a tool to take out the pusher unit from the case first. Please could I have tool recommendation? First picture (black case): The outer diameter pusher unit (with teeth) is 4.1mm and the space to go in has a diameter of 5.5mm. I do not have a suitable tool of hold the pusher unit to rotate it, so need help. Not sure if this would work https://www.cousinsuk.com/sku/details/pusher-pendant-tube/p1433?skuId=47515 Pictures here are from the web as I closed the case before taking pictures, but can provide own pictures if needed.
-
I am trying to source a female 2mm Diameter pusher for a vintage watch, anyone know where I could go about finding it. Please see the images here: https://photos.app.goo.gl/WmG4LHvLTi5tdmJu6 -
Hi, Recently the pusher for my Seagull 1963 decided to fall off, without me knowing about it. I have done a little searching but since this is a personal watch I don't want to spend unneeded money on several pushers in case my initial choice does not work. So, I included some measurements and i hope somebody could be able to help. I don't know too much about pushers, but from looking at the remaining one I can see that the protruding part of the pusher screws into the head. PS: the outer diameter of the actual pusher is 3.95-4mm. Any help is appreciated, thanks! https://imgur.com/a/9Oq1Qyj
