Search the Community
Showing results for tags 'auto'.
-
Now I don't blame the seller for this, but a glued on dial?!?, I knew it the moment I opened case, but was able to very carefully pry away dial with xacto blade. (thankfully cheap glue!) One mismatched 23 jewel in a 17j case! (BONUS), this is why I always look for case/movement/dial numbers or ask questions if pics are not clear. All three were listed parts and repair, so for $20USD + $6 ship, why not? The glued dial is running and the "TV looking" case is a 6309, (17J) in a 6349, (23j case), I think I will correct. Oh and found a phantom screw, not from movement, hanging out under balance, once removed, she started running. All in all not a bad weekend, two out of three runners and 23 jewel to boot! BTW it has badly handled hairspring, probably replace entire balance.
-
I just purchased a Waltham Selfwinding watch marked B-251K on the inside of the case back. First of all, it is marked 25 Jewel on the face and 17 Jewel on the rotor, which I found odd but its nothing I haven't seen before, and that's where the trouble started. The watch runs, and runs very well. However, the rotor is wobbly and loose that it contacts the balance wheel at times in its travel. The rotor does not attach with a screw, but rather with a sort of sliding clip. I am no watch repairman, more of a tinkerer who has opened and successfully repaired and maintained a watch or two in my life. I'm beginning to think this might be the wrong rotor, but it appears to be a perfect match, even drops in perfectly, but it is so loose it practically falls out. Ideas anyone?