Jump to content

Longines 284 parts needed

Wesley881

By Wesley881
in Watch Repairs Help & Advice

 Share

Recommended Posts

Wesley881 Watch Enthusiast

Wesley881

Posted
Posted

Hello all,

 

I've received a Longines Cal 284 that took a punch on the nose many years ago and the center (seconds) wheel has a bent shaft. The second hand is non existent. I'm submitting a parts request to Otto Frei but also wanted to reach out and see if someone has these parts available or a scrap movement.

 

Thanks as always for the continued support.

 

Chad

 

Sent from my SM-G920V using Tapatalk

 

 

Link to comment
Share on other sites
Wesley881 Watch Enthusiast

Wesley881

Posted
  • Author
Posted
Excellent! Thank you! Apparently the 280 was the 'base model' with 281 having date, 284 and excenter regulator, and the 285 like the 284 with date. This should work.

Best regards,

Chad

Sent from my SM-G920V using Tapatalk

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Balance cock stud screw

      By Neverenoughwatches · Posted

      As Richard said, this is a really old school trick for joinery.  Cut i strip of paper, might need to be watch paper  around 1 " x 1/2" lay it over a staking block then press the stud screw into and through the edge of the paper upto the head of the screw. You probably wont even need to pull the paper away the head will pull itself through.
    • Neverenoughwatches
      Leaving the forum for a while.

      By Neverenoughwatches · Posted

      Thanks Jon, my mum is getting there day by day, so strong and determined, they dont make em like this anymore 🙂 Old folk are so amazing,  my mum used to love her golf, she didn't stop playing until she was 70 . Enjoy your trip and your golf.
    • ooteenie
      Waltham 6/0 d winding stem

      By ooteenie · Posted

      Hello,  i am looking to source a winding stem (winding arbor) for a waltham 6/0 d movement. I have found some that claim to fit 6/0, 6/0s, 6/0b etc and somealso claim they will also fit the d as well. The d does have hacking which is driven by the stem seating completely. Given some of the costs of these, i was hoping someone would know of any interchangeability with a source, or know a source where a confirmed 6/0 d stem can be had. I am in the US so a US dealer is best.    thanks in advance. 
    • rehajm
      Leaving the forum for a while.

      By rehajm · Posted

      So great to see and hear- your mum looks great! …my mil had a stroke last summer in the golf course parking lot. I’m flying out tomorrow to visit and play golf. she’s ornery because she can’t get off the tee but I hear she makes up for it on the greens since she’s been putting since a week after her stroke 🧐…
    • JonC
      Leaving the forum for a while.

      By JonC · Posted

      Very best wishes to you and your family, as a carer myself I know how difficult things can be.
×
×
  • Create New...