Dial Feet Ronda/harley 715
-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
Posts
-
I would just splash water on it or soak it in water for about 15 minutes.
-
By ScrewDropper · Posted
I have just purchased a new stone. My only India stone, which I inherited with the house 20 years ago, works great for sharpening screwdrivers but I wanted something new, flat and with medium and fine surfaces. I put a generous amount of oil on it and the stone just absorbed the lot. I've had a scout online and a suggestion was to melt petroleum jelly and immerse the stone in that overnight. Im going to need a lot of jelly for that and it's going to get messy. Is this the best method of preventing the stone from absorbing all the oil I have or should I keep feeding it until the oil rests on the surface? -
Hi there...thanks for your reply....no that's the one I found that has different keyless works and the click is different. Unless of course my one was a 'newer version' of the calibre.
-
Sorry I hadn't picked up on the 7019 case part. It's a while since I've worked on one of these and just now thought it may be a one piece case but seen a gold version with the chrome back so must come off. I'll try and dig through mine tonight and see if I've got one.
-
By Neverenoughwatches · Posted
Thanks Nev, its my first attempt at repivoting anything, but yes its big so it eases me into the operation. Pivot is only 0.34 thats small as far as I'm concerned 😆
-
Recommended Posts