Jump to content

Removing seized link from a Rolex Jubilee bracelet

RobBrandywine
 Share

Recommended Posts

RobBrandywine Member

RobBrandywine

Posted
Posted

Well, the link isn't seized but the screw head of the pin/machine screw is boogered and the screw is too tight to turn with the grip available.  A watchmaker applied heat to no avail.  Can I saw through the link next to it and cut the machine screw and put some vice grips on the shaft and turn it out that way?  Or any ideas on a better way?

Link to comment
Share on other sites
RobBrandywine Member

RobBrandywine

Posted
  • Author
Posted

Sorry, there's no way I could get a good photo of the screw head.  It's about 0.5 mm or less across. Don't know how much heat was applied but I assume the watchmaker knew what he was doing. I'm a little confused about removing the links, but I think you have to remove a removable link from each side of a non-removable link, then remove the non-removable link.  I guess I'll just spend $55 and replace the bracelet with a chinese one from off of Amazon.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      404 Club Reboot

      By Neverenoughwatches · Posted

      The best and almost only way to achieve the magical £ 4.04 individual watch cost is via the loophole ploy of job lot buys Ross. Dividing down the outlay by the number of watches purchased. I've managed it many times in the past, this then gives you the extra edge of choosing any watch from that lot. Maybe we should have an all time winner, whos prepared to troll  through the last four years of posts and pick some worthy contenders. Unfortunately i have a poorly shoulder so i cant raise my right hand and my left shoulder is out in sympathy for my right shoulder. Put your right hand up if you think i talk a load of bull 💩     🖐
    • rossjackson01
      404 Club Reboot

      By rossjackson01 · Posted

      Ah but, will you count DIY versions.
    • tomh207
      404 Club Reboot

      By tomh207 · Posted

      £10.00 is not a huge amount for a watch these days with the increased asking prices. Let’s count ourselves lucky we don’t have this for tools, it would be £404.00 🤪   Tom
    • Neverenoughwatches
      404 Club Reboot

      By Neverenoughwatches · Posted

      I have the perfect solution for this, i just dont invite anyone round.
    • Waggy
      404 Club Reboot

      By Waggy · Posted

      @rossjackson01 it's only getting harder and harder to get 'cheap' watches to work on, I have done some reading and depending on the source the prices of vintage watches is increasing somewhere between 10% and 50% a year. The only way I have found to get watches to lay the 404 game with is to buy a bulk lot say 10 with an average price of < £4.04 but even that is getting harder and harder, hence the re-boot. I see that £6.99 is looking like a popular choice - but I ask the members, is £6.99 realistic, can you actually find watches to work on for £6.99 - maybe its better to cut to the chase and jump to £10.10 for example and allow more people to play? Jut a thought.
×
×
  • Create New...