-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
-
Posts
-
I think your axes are mislabelled here. They need switching around. -
-
By Neverenoughwatches · Posted
🤔 so how is this relevant to the crystal coming out. I've never heard of a crystal that comes out through the back. ? -
By Neverenoughwatches · Posted
Very kind of you chief, the problem is the roller table and knowing if it will interact with the fork. Another roller for this calibre is what i probably need the most. It will have to sit for now while I'm away on holiday for a week. Its an interesting little piece with the cardboard dial which i still haven't got to the bottom of yet. Curious as the OP said his 554 was marked Invicta and this made up dial is also branded Invicta. -
By Neverenoughwatches · Posted
Looking at Nev's graph the thinner longer spring is delivering less torque but over a longer period of time. For this to happen and completely unwind itself increasing the power reserve the friction through the train must be less than if a specified spring were fitted.
-
Recommended Posts