-
Topics
-
-
Posts
-
I measure staff length as 3.42mm. Assuming that's the last column, I guess I have a 1088. Will it really be as simple as ordering that part from Cousins? I'm thrilled if so, although it's not cheap once I factor in postage to AU. -
By watchweasol · Posted
There are two good reasons. One being the screwdriver slipping and causing damage, and Two the possibility of breaking the screw head off. And couple that with the fact that that is not what it is designed to do. Use the winding stem !. -
By watchweasol · Posted
Hi. Is this @ two or three train clock, the warning wheel makes a quarter turn when going into warning at approx five to the hour and being stopped by the long lever.when the long lever is lifted to the high position by the center cam the warning wheel is released for thr strike to take place. -
By watchweasol · Posted
Not all drum clocks are the same, bear that in mind when looking for a replacement. Measure the distance between the plates for reference. It is possible to re pivot the fly by drilling the end and inserting anew one. The end must be annealed before drilling as it is hard. -
To my eye @nevenbekriev the spring looks like it's in a single plane now. The previous photos were difficult to interpret in that sense. Can you point out where?
-
.thumb.jpg.19a9c4ff164d78d516aa9f05a063752b.jpg)
