Jump to content

Tissot C01.211 movement problem

bosstaki
 Share

Recommended Posts

bosstaki WRT Addict

bosstaki

Posted
  • Author
Posted

The stem was already broken when I got the watch, so there was a piece already left in the movement, so I don’t what the setting was at when it broke! There’s still a broken piece left in the crown which i can’t get out! I just removed the broken piece left by the detent button as normal!

AndyGSi Distinguished Member

AndyGSi

Posted
Posted

I suppose the first question is have you got the correct replacement stem.

If you've removed it in the setting position then you could try pressing the button while inserting the stem.

Other than that it's a case of possible strip down to get to the setting lever. 

bosstaki WRT Addict

bosstaki

Posted
  • Author
Posted

I ordered a tap 1.00 stem for the moment C01.211 & a new Tissot gold crown for the watch! I’ve tried putting it back in pressing in the detent button, but it feels a bit springy when I try to put a bit of pressure on it? Do you know where I can get a parts list & a brake down of the keyless watch parts details! 

bosstaki WRT Addict

bosstaki

Posted
  • Author
Posted

Thanks for the reply! How do I find out exactly what replacement stem i need please! I’ve just had at that pdf file you’re just sent & i can’t make head no tails of the item required mate! Sorry to be a pain! 

AndyGSi Distinguished Member

AndyGSi

Posted
Posted

If you've got a stem for an ETA C01.211 then it should be correct.

The other possibility is that the tip of the old stem has snapped off and is still in the movement.

You can compare the piece your removed to confirm it's correct and not broken.

Photos as always would help.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Tip and tricks here.

      By Neverenoughwatches · Posted

      Making a stud pin for a pocketwatch from 1mm copper wire, softer than brass but it will do the job. The lathe cost 3 pound including the chuck, powered from an old electric shaver adapter. 
    • tIB
      Another 6105 back in action!

      By tIB · Posted

      And I'm already very pleased with my life choices...
    • LittleWatchShop
      Looking to try servicing an old movement

      By LittleWatchShop · Posted

      Demagnetizers work on the principle of a decaying magnetic field. Whether the expensive Elma or the cheap Chinese...same principle. For the cheap ones, you are decaying the magnetic field manually by drawing the watch away from the demagnetizer while it is energized. The Elma (and others) generates a decaying magnetic field electronically so you don't have to do the work. If you use the cheap ones properly,  they will do the job. I prefer the Elma style...but that is just me.
    • mbwatch
      Looking to try servicing an old movement

      By mbwatch · Posted

      I also still use my cheap first set of screwdrivers. I replaced the blades of the smallest (0.6mm) with higher quality once I had bent a few of the originals, but beyond that I have been fine. Note though that I do not work on any remotely valuable watches and most of what I deal with are in a truly terrible state, watches that have been banging around in kitchen drawers or toolboxes. So my concern for screw head slot integrity and scratches is usually not very high.  As for a loupe - you won't need anything powerful for an ST36 that is new. You don't need to do close inspection of balance pivots because they will not be worn out, and a 3x or 5x loupe is perfectly sufficient to see the oiling. I don't have any microscope or powerful magnification of any sort. I just use cheap loupes. But again this would be different if I were working with more valuable watches. And if I had equipment to burnish pivots, then I would get a microscope to check my work.
    • Neverenoughwatches
      Looking to try servicing an old movement

      By Neverenoughwatches · Posted

      I've recently switched over to using a x2.5 -x3 eyeglass for disassembly and some larger part assembly. It's interesting to see how accustomed and trained your eyes become to that way of working after using a microscope for years. And pick up and work at eyelevel when possible. Personally I would stick with and learn to use regular oilers efficiently. 
×
×
  • Create New...