Jump to content

Seconds hand question

Smokey

By Smokey
in Tools & Equipment

 Share

Recommended Posts

Smokey New Member

Smokey

Posted
Posted

Removed a movement and dial on a Marathon SAR Quartz  ETA F07.111 to clean some dust off the dial (did not work even with Rodico due to the dial texture).  

Upon finishing, I manually nudged the seconds hand several times in an attempt to get it to hit the markers as it was doing quite accurately prior. 

it is keeping time and hits most of the markers. If it turn the watch as the seconds hand goes around, keeping the seconds hand level to the ground,, it seems to hit the makers better. This may have been the case prior. 
 

Have I damaged the movement in any way?


 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • rjenkinsgb
      Questions about my Bravingtons Renown Mantel Clock

      By rjenkinsgb · Posted

      Off topic, but that just brought back an old memory! My mother once told me about a minor incident as a child (born 1917, so 1920s, at a guess). She used to use "Fish glue" for a hobby - an apparently smelly glue that had to be heated to be usable - and to heat it gently, she had to stand the tin in the kettle.   One day someone filled the kettle without seeing the glue tin.. The tea tasted of fish for some time afterwards!  
    • Neverenoughwatches
      Balance cock stud screw

      By Neverenoughwatches · Posted

      As Richard said, this is a really old school trick for joinery.  Cut i strip of paper, might need to be watch paper  around 1 " x 1/2" lay it over a staking block then press the stud screw into and through the edge of the paper upto the head of the screw. You probably wont even need to pull the paper away the head will pull itself through.
    • Neverenoughwatches
      Leaving the forum for a while.

      By Neverenoughwatches · Posted

      Thanks Jon, my mum is getting there day by day, so strong and determined, they dont make em like this anymore 🙂 Old folk are so amazing,  my mum used to love her golf, she didn't stop playing until she was 70 . Enjoy your trip and your golf.
    • ooteenie
      Waltham 6/0 d winding stem

      By ooteenie · Posted

      Hello,  i am looking to source a winding stem (winding arbor) for a waltham 6/0 d movement. I have found some that claim to fit 6/0, 6/0s, 6/0b etc and somealso claim they will also fit the d as well. The d does have hacking which is driven by the stem seating completely. Given some of the costs of these, i was hoping someone would know of any interchangeability with a source, or know a source where a confirmed 6/0 d stem can be had. I am in the US so a US dealer is best.    thanks in advance. 
    • rehajm
      Leaving the forum for a while.

      By rehajm · Posted

      So great to see and hear- your mum looks great! …my mil had a stroke last summer in the golf course parking lot. I’m flying out tomorrow to visit and play golf. she’s ornery because she can’t get off the tee but I hear she makes up for it on the greens since she’s been putting since a week after her stroke 🧐…
×
×
  • Create New...