Timex M24 Repair Issue (Problem with balance?)

Hello all, I'm new to the forum and watch repair in general and was hoping someone could point me in the right direction on the issues I'm having with these movements. I received the two watches for parts/repair hoping to repair them back to working order. I cleaned the movements following guides online/the repair manual, lubricated and found both movements still not working. They both take a wind but the balance wheel refuses to oscillate. Looking through a loupe I see that the impul

Hi As Andy said move the balance to its free side up to the banking pin and hold there next move the fork/pallet to wards the same side untill the impulse pin on the balance engages the fork/pallet. Use no force at all. If it engages ok without pressure release the balance and now it should work. If you cannot engage the impulse pin with the for/pallet using this method then undo the moveable "V"conic bearing untill you are able to manouvre the impulse pin into position then tighten the "V"con