Hi everyone,
I have this movement which is from a 60's Everite King. The movement has been running great while I have been refurbishing the rest of the watch but I've run into problems.
I accidentally advanced the date too far and decided to pull the crown and wind the watch forward a full month. This was not the best idea as around 21 days in the winding began to feel much looser. The watch still runs but the minute and hour hands don't move.
I am going to try to tighten the ca
So this is the exact problem my as1906 had. It's not the canon pinion dial side, the great gear that transfers power has 2 gears, one is loose and needs to be tightened.