Jump to content

Mums watch - "can you take a look"


ro63rto

Recommended Posts

She asked if I could take a look.
When I turned up today, she handed me what I thought was a bracelet.
A closer look revealed a tiny watch with a dial in a bit of a poor state.
 
Of course she was joking but she just wanted to show me it. She claims its "about 100 years old"
 
Any ideas if it could be really that old.
If needs be I could try to open it up for more photos tomorrow once I've set up my new desk lamp.
 
MIYp8Ds.jpg&key=90f0c9cf36df0ea1263dffbe62278b0100a4fe840d5c150f4f11fa4fe83c760a



z46P9J6.jpg
Link to comment
Share on other sites

16 hours ago, ro63rto said:

She asked if I could take a look.
When I turned up today, she handed me what I thought was a bracelet.
A closer look revealed a tiny watch with a dial in a bit of a poor state.
 
Of course she was joking but she just wanted to show me it. She claims its "about 100 years old"
 
Any ideas if it could be really that old.
If needs be I could try to open it up for more photos tomorrow once I've set up my new desk lamp.
 
MIYp8Ds.jpg&key=90f0c9cf36df0ea1263dffbe62278b0100a4fe840d5c150f4f11fa4fe83c760a

 


z46P9J6.jpg

 

It never ceases to amaze me how small this ladies vintage watches were. They must have had remarkable eyesight.

  • Like 1
Link to comment
Share on other sites

Ok

Small update

Abandoned trying to use my new light as i had to use a macro lens on my mobile to get a good enough pic so it blocked out the light [emoji35]

 

Anyway, the case is 18k gold [emoji322]

 

zjfGz2z.jpg&key=cc3e509f102278fe6e3cfbcf0006791700afd34b3e1485af6f7a3360e8b2780c

 

The dial isn't as bad as it looked, it's the plastic crystal that's badly scratched.

 

yOhz22B.jpg&key=5dc64b6e59cce7f5c97bd1bd0ba3ba45871cd26f37442428967ba038c1a9321a

 

Can't see any makers marks on the teeny tiny movement though. Difficult to get a decent pic using a mobile phone [emoji26] . As I said, still ticking away [emoji106]

 

Trig2Mv.jpg&key=6e57c08eb4c88cbe9795c11eeef6d58d5ebab3e4b52aa727a3473b51b8e9e641

 

 

Link to comment
Share on other sites

Looks like a cylinder movement. The photo is not that clear for my eyes. I’m saying cylinder because the balance wheel is not compensated. You should be able to clean that dial up, remove the hands, You need a rubber the sort that rubs away pencil marks, rub all over the dial, don’t worry you will not harm the dial in any way. It will come up a lot better than how it looks at present.  

Link to comment
Share on other sites

On 10/15/2018 at 2:00 PM, ro63rto said:

Thanks guys emoji106.png

Hopefully I'll get a few photos today. Setting up my temporary little area for a few jobs and will try out this new light.
fvcn1cM.jpg

I have these lamps, they really do a great job, they have a dimmer and you can set warm to cold light

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi as an addition a pertaining to the assembly of a 6319B  which will be handy for those working on this caliber Polly's 6139 guide.pdf 6139A.pdf 6139B.pdf
    • Casio MDV106G-1AV Gold DURO200 I'm going on a long family vacation to Southeast Asia this summer and wanted a cheap but reliable beater in case I lose it, break it, or get robbed. Quartz movements aren't my thing, but I'm not dogmatic and this was a cheap option. A few years ago you could buy it for under $50, but since this particular model with the Marlin fish has been discontinued, you have to pay about double that, but I still thought it was acceptable. Sure, I could wear one of my cheap and very reliable Vostok Amphibian divers watches, but I have a personal relationship with them (having put a lot of work into them) and don't want to risk losing them. Strangely, I feel very excited. Maybe because I haven't bought a brand-new watch in over 10 years! 😀 The only downside is that this is the watch Bill Gates has been seen wearing, and I'm not exactly a fanboy of Bill Gates. Anyway, who cares!?
    • This post has some pictures that describe how to get the spring back into the setting without having to disassemble anything.  With patience, this approach works.  The advice that the spring will ‘float’ back in when positioned just right is spot on. If you try to push it so it flexes and pops back into the setting, it’ll probably just fly away, as you’ve already found.  Hope that helps, Mark
    • I recognize myself all too well. It takes a lot of experience and discipline to recognize when it's time to cancel and come back at a later time. Very well said! We should have a forum dedicated to this topic as it is critical to achieve success when working on watches. It's a lot more important than most other things related to watch repair. And yes, just a short break can make a world of difference!
    • Hello Wai and welcome to the forum. A little information to enlighten you a little more TZIllustratedGlossary.pdf
×
×
  • Create New...