Jump to content

Mums watch - "can you take a look"


ro63rto

Recommended Posts

She asked if I could take a look.
When I turned up today, she handed me what I thought was a bracelet.
A closer look revealed a tiny watch with a dial in a bit of a poor state.
 
Of course she was joking but she just wanted to show me it. She claims its "about 100 years old"
 
Any ideas if it could be really that old.
If needs be I could try to open it up for more photos tomorrow once I've set up my new desk lamp.
 
MIYp8Ds.jpg&key=90f0c9cf36df0ea1263dffbe62278b0100a4fe840d5c150f4f11fa4fe83c760a



z46P9J6.jpg
Link to comment
Share on other sites

16 hours ago, ro63rto said:

She asked if I could take a look.
When I turned up today, she handed me what I thought was a bracelet.
A closer look revealed a tiny watch with a dial in a bit of a poor state.
 
Of course she was joking but she just wanted to show me it. She claims its "about 100 years old"
 
Any ideas if it could be really that old.
If needs be I could try to open it up for more photos tomorrow once I've set up my new desk lamp.
 
MIYp8Ds.jpg&key=90f0c9cf36df0ea1263dffbe62278b0100a4fe840d5c150f4f11fa4fe83c760a

 


z46P9J6.jpg

 

It never ceases to amaze me how small this ladies vintage watches were. They must have had remarkable eyesight.

  • Like 1
Link to comment
Share on other sites

Ok

Small update

Abandoned trying to use my new light as i had to use a macro lens on my mobile to get a good enough pic so it blocked out the light [emoji35]

 

Anyway, the case is 18k gold [emoji322]

 

zjfGz2z.jpg&key=cc3e509f102278fe6e3cfbcf0006791700afd34b3e1485af6f7a3360e8b2780c

 

The dial isn't as bad as it looked, it's the plastic crystal that's badly scratched.

 

yOhz22B.jpg&key=5dc64b6e59cce7f5c97bd1bd0ba3ba45871cd26f37442428967ba038c1a9321a

 

Can't see any makers marks on the teeny tiny movement though. Difficult to get a decent pic using a mobile phone [emoji26] . As I said, still ticking away [emoji106]

 

Trig2Mv.jpg&key=6e57c08eb4c88cbe9795c11eeef6d58d5ebab3e4b52aa727a3473b51b8e9e641

 

 

Link to comment
Share on other sites

Looks like a cylinder movement. The photo is not that clear for my eyes. I’m saying cylinder because the balance wheel is not compensated. You should be able to clean that dial up, remove the hands, You need a rubber the sort that rubs away pencil marks, rub all over the dial, don’t worry you will not harm the dial in any way. It will come up a lot better than how it looks at present.  

Link to comment
Share on other sites

On 10/15/2018 at 2:00 PM, ro63rto said:

Thanks guys emoji106.png

Hopefully I'll get a few photos today. Setting up my temporary little area for a few jobs and will try out this new light.
fvcn1cM.jpg

I have these lamps, they really do a great job, they have a dimmer and you can set warm to cold light

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Welcome to the group Stirky. You can search for just about every subject in the craft here. Don't be afraid to ask if you can't find the answer that may have already been covered ( some ad nauseum LOL ). You don't have to buy Bergeon to get good quality. There are many decent mid-range tools available that will last you a lifetime. Cousins would be a good place to start . Cheers from across the pond ! Randy
    • I picked up a similar amount of these jewels some years ago in a watch and clock fair. Every now and then they come in handy. This week I've got a rubbed in bombe jewel in the balance cock that is cracked and needs replacing. Very handy to have a vintage assortment of these type of jewels!
    • Great diagram with the teeth and pinion count. Simple way to reduce the speed of the hour wheel by the 12:1 minute wheel. Genius and yet so simple. Always good to reinforce the principal by what you have done in your drawing. Keep doing that. I had a drawing on my wall for years showing me this which is very similar to the drawing you have done. Here's a formula to work out the beats per hour of a watch movement. The movement's BPH is dictated by the wheel teeth and pinion count and the hairspring being vibrated to the correct BPH by finding the pinning up point on the hairspring using a vibrating tool.  The reason in the formula there is X2 on the top line is because there are two pallet stones.
    • So I just wanted to say "thank you" again.  The angle is the key bit it seems and yes, it did basically just fall, or float, back into position when I got it lined up just right. I had meant to add that now that I see how it goes in, I totally see how it came out in the first place, and that whomever cloned the original movement didn't pay much attention to the fine details around the setting or how it interfaces with the balance cock or the "rings" on the regulator and/or stud carrier arms.
×
×
  • Create New...