Jump to content

Which watches to select when on Holiday \ Vacation


JerseyMo

Recommended Posts

9 hours ago, wls1971 said:

When holidaying in London once a year I wear a cheap Casio digital this is to avoid being stabbed, shot, mugged or having acid thrown in my face and being run down in the street by moped gangs.

I don’t blame you. London has become a shithole.

Link to comment
Share on other sites

7 hours ago, oldhippy said:

I don’t blame you. London has become a shithole.

 

The same can be said of most large western cities.I used to live in suburban NY.It was a nice place until they decided to be a sanctuary state for illegal aliens, and the next town over became an MS 13 gang strong hold. I Now live in rural North Carolina, I don't have to sleep with my mauser next to the bed, and there are no tall buildings that people might want to crash a plane into.

  • Like 1
Link to comment
Share on other sites

I think this might hit the mark, being both inexpensive enough to take on holiday, and interesting enough to warrant actually wearing. AsPurchased.thumb.jpg.7ee7169674a376d97fa703b59e20708e.jpg

Its heading my way from that well known Yorkshire fishing village Eee-bay, (don't expect my jokes to get any better than that or you will be disappointed).

Another potential member of the 404 club, assuming I get it working of course, membership is strictly limited to the living rather than the dead. It just squeezed in to the aspiring members list with five pence to spare.

I still haven't had a chance to search locally here holidaying in India for a potential sibling for it, but if I do, I'll be sure to let you all know. 

Link to comment
Share on other sites

Well here's something I am currently investigating..not wishing to cast aspersions on the hmt watch...in most cases they have a reputation for being severely worn and poorly serviced...however they do have a stainless steel case which gives excellent service....on the other hand you have the caravelle by bulova...which has practically an identical Japanese version of the same movement.they are generally not worn out and unmolested...however they have a shoddy pot metal case.I think it possible to put a caravelle 11dp in an hmt case and very a very nice very serviceable watch.possibly the ultimate vacation watch.....keeping in line with this thread!

Link to comment
Share on other sites

From what I've seen and read, the HMT movements are fairly robust. As to being worn and poorly serviced, the same could sadly be said for a lot of, if not most older mechanical watches these days. Sadly very few people take the time, or spend the money necessary to keep a watch clean, services, and in good repair. If you want a new HMT automatic, however, you can still pick them up from the HMT site (at the time of writing this). As I understand it, they are slowly running out of parts to build these watches, so now would be the time to to acquire one. 

I do agree that most of the HMT watches you see on ebay, are likely to fit the description of severely worn, and poorly serviced, but there are occasional gems to be found.

Link to comment
Share on other sites

The day I finished watchmaking was the day I gave up wearing a watch. I don't have any watches in my home.


But you’re not telling the whole story. You may not have a wristwatch but you pull a trolley with you wherever you go that has a long case clock on it...


Sent from my iPad using Tapatalk
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Thanks, This watch was in a box of old scrape units that a friend gave me. They used to be his late father's who was a watchmaker before the war and then continued later in life. I picked this one out as it looked like it had potential, and I liked the dial, it's been a bit of a learning curve for a beginner but I was determined to get it going. Now I'm on the final lap it feels good. I'm just wondering whether to invest in a decent set of hand placement tools or stick with the cheap Chinese red thing I have, decisions decision 😆
    • An update, for everyone who contributed advice, and for those who come after with a similar problem. Based on the answers received, I decided to work on the face of the hammer first. I used a square degussit stone to guarantee a vertical surface to work against, and ground the face back until it was square across 90% of the depth. I was conscious of the risk of removing too much material.* After I'd got the shape how I wanted it, I polished the surface with lapping film. To cut a long story short, it did the trick and the hammer hasn't slipped off the cam since. Of course, that wasn't the end of my problems. Have a look at this video and tell me what you think is wrong. https://youtu.be/sgAUMIPaw98 The first four attempts show (0 to 34 sec.) the chrono seconds hand jumping forwards, the next two attempts (35 to 47 sec.) seem "normal", then on the seventh attempt (48 to 54 sec.) the seconds hand jumps to 5 sec. and the minute counter jumps to 1. The rest of the video just shows repeats of these three variants. I solved it by rotating the minute counter finger on the chronograph (seconds) runner relative to the cam.  I'd be interested to hear your opinions on that. It seemed to be the right thing to do, but maybe I've introduced another problem I'm not aware of. * What is the correct relationship between the two hammers and cams, by the way? Should both hammers strike the cams exactly at the same time, or is it correct for the minute counter hammer to be a bit behind the seconds hammer? In this picture, I removed the adjusting screw at 1, and the hammers are contacting the cams simultaneously at 3 and 4. I had to turn the screw down tight to achieve this condition after stoning the seconds hammer and replacing the bridge.
    • It was easy enough to pop off. Once I had the cannon pinion hanging on the blades of the stump, I got my #2 tweezers on the gear attached to the staff and levered it down. That way none of the force was on the brass wheel itself.   I reinstalled it and the bridge, and it looks like a small but reasonable amount of end shake. It also spins easily with a blower. It stops quickly, but I think that's due to the large shoulder and about what I'd expect from this wheel.  
    • Oh, right. For some reason I was picturing a monocoque case in my head. Good looking watch!
    • Well said Ross. My reason for the thread, i like many of us dont want to lose the forum, such a well knitted group of individuals i feel. But things can happen out of anyone's control. Would be nice to have something in place just in case, if anyone has any ideas please speak up. 
×
×
  • Create New...