Jump to content

Help with assembly seiko 6145-8000

Muligans
 Share

Recommended Posts

oldhippy Distinguished Member

oldhippy

Posted
Posted

I have said this many times on the forum. Ronsonol lighter fluid is shellac friendly. You could leave any watch part that has shellac on it in ronsonol for days. Just remember it evaporates very quick, so you need a pot with a screw lid.

It is always good practice in whatever cleaning fluid and rinse you chose to read the instructions and see if it is suitable for your needs. In my time, I used L& R cleaner and rinse and found them to be excellent. They were shellac friendly then. Today they might have changed the formula, so be careful.  

Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted

I would design the pallets/fork with slots for the pallets to slide in the fork and stay put. Or ,if the pallets adgustments are left for the assembly line, I would design fixture to hold the pallets in the right position to get shellac- ed. I certainly wouldn,t  count on shellac friendship.And about the heat, I warn you not to stand under the sun light or risk getting de-shellaced.

OH is right again, you just can,t be sure of the qualities,  be it oil, grease etc.

One might as well  get some grease off of this guy :bbq:.

The moments you spend laughing are happyy.

Regards joe

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Without Our Forum

      By RichardHarris123 · Posted

      Hopefully if the issue is running costs, Mark would let us know and suggest ways of raising finance. If it's the other issue, which we are skirting around, sites can be passed onto others.   PS because I know you're all interested, I  had a bacon and mushroom sandwich for breakfast.  Hehe. 
    • oldhippy
      Intro

      By oldhippy · Posted

      Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement. 
    • watchweasol
      Intro

      By watchweasol · Posted

      Hello Nosh and welcome to the forum.   Enjoy
    • watchweasol
      Without Our Forum

      By watchweasol · Posted

      Hi guys, the question is what is a forum, a place for discussion and passing on information, idle chat and a bit of fun and I for one are the richer for it. When in Hospital last year with the Covid being force fed oxygen and feeling total sh1t and close to the pearly gates a daily look on the forum to see what was going down helped to keep me focused on the job in hand took my mind off the problem for a short while but it was a lifeline for sure. We chat to friends for that is what they become around the world read their posts help where we can post information where we can.  I like @Neverenoughwatches some times think of members past and wonder if they are still at the watches or given up, some drop in for advise and drop out again never to be heard of again. The forum reminds me of Yorkshire hospitality, The door is always open and the kettle on the stove. Long may it continue.   My two bobs worth.
    • KenD
      Main spring

      By KenD · Posted

      Thanks all.   Movement is a Helvetia 800C. Don't know any history e.g. if the broken mainspring is original. Watch was bought recently as non-working. Really interesting piece that Jon, thanks. I'd only been thinking of length relating to power reserve. I don't have a mainspring winder (yet) so I'd like to avoid winding the spring into the barrel by hand. The old spring measures at 1.60 x .11 x ~290. Sorry, can't be exact on the length. The piece I still have is 275, but the second piece escaped during measurement. Best measurement I had for it was ~13. The micrometer does zero accurately so I'm pretty confident of the .11 Also, I'm getting the barrel ID at 9.5 on a vernier. I'm now wondering about going with a .11 spring? Given all of the above, maybe 1.60 x .11 x 300 x 9? Any thoughts? Cheers.
×
×
  • Create New...