Jump to content

Seiko 6119-6400 repair help

Peet
 Share

Recommended Posts

Peet New Member

Peet

Posted
Posted

Hi everyone,

I'm new to the forum and watch repair. It's great to have a resource like this when things aren't working as they should!

I recently bought a 6119-6400 with a couple of known issues that I'd appreciate some assistance with.

Firstly, the internal bezel is very stiff, it turns but with quite a bit of effort. Secondly, the quickset date works, but the crown sticks once pushed in and the day won't change when the crown is pushed. It does advance when changing the time between 9pm and 1am though.

Lastly, I confess I'm not much of a fan of the hardlex crystal and would love to try a slightly domed sapphire (it's a UFO, right?). How do I find something to fit, any suggestions? I have the sense that trying any old 33mm crystal is unlikely to work.

Thanks in advance for any help you can offer!

 

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

Hello Peet,

On this friendly forum before making a post for help or advice. We like new members to introduce themselves. Just say a little about what you do and about yourself.

We like that to go into the Introducing Yourself Here. This is the link.

https://www.watchrepairtalk.com/forum/23-introduce-yourself-here/

Members please do not reply until he has introduced himself.

Link to comment
Share on other sites
  • 2 weeks later...
Peet New Member

Peet

Posted
  • Author
Posted

Hi all, any thoughts on the items above? I have completed a teardown and rebuild of the calendar works, which has helped with the sticking of the crown. I also noticed the day does advance when the movement is out of the case but there doesn't appear to be enough travel on the stem to activate it when in the case. Would this suggest the stem has been replaced with one that's too short?

Also, in looking at the inner bezel, it appears like removing it and cleaning thoroughly might be a good place to start. Any ideas on how to remove the outer ring surrounding the crystal though? It seems I'd need to do this to access the inner bezel. Finally, any grease or oil required for this bezel to function smoothly?

Apologies for the barrage of questions, thanks in advance for any advice

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      I looked at it like this, I've built a lot of stuff in my time, building structures and furniture,those are my creations and they will still be here way way after I'm gone. Traditional watchmakers felt the need to pass their knowledge on, ideas that they created . I assume with them as it is with me, leaving their mark on the earth, a way of being remembered. This creation of Mark's has brought thousands of people together to pass their knowledge around,  ideas that will continue to be used for lifetimes. Ideas that should continue to be procured. If for whatever reason the forum ceased to exist, not quite like Ranfft's, that didn't disappear but much less usable. Then that is sad, such a massive loss of communication between good people and a wealth of knowledge lost. There should be something in place for when that happens which could be next week, next year or in 10 years. Might not be a topical subject for a lot of folk or boardering on controversy, i did say i talk about stuff other people dont. But if you dont talk about it and something happens then you've lost it and you ain't gonna fix it .
    • Waggy
      Without Our Forum

      By Waggy · Posted

      I've remained silent on this thread, and at the risk of upsetting everyone, the thing that worries me the most the the apparent absence of Mark. The moderators do a great job and the members also pitch in, and the site seems to run itself, but it is a concern for the future of this forum when the owner is absent for all intents and purposes. Like many of the comments above I would hate to log in one day and things be closed down as I rely on this site for ideas and knowledge and also cheer me up. maybe the Moderators could reach out to him, assuming he does not read this thread, and express our concerns and let us know the plans going forward? some kind of WRT ark
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      That was the exact reason for me starting this thread watchie. Still we haven't worked out how the regulars are going to hook up if it goes tits up. I honestly think something should be arranged to stay in contact, we all help each other so much. 
    • Neverenoughwatches
      Setting lever spring

      By Neverenoughwatches · Posted

      Yeah ive watched that a few times before,  i couldnt find my old school dividers to scribe it up 😅 Yep thats the guy i bought a roll from . Thanks Nicklesilver that answers that perfectly and more or less what i thought an experiment over time would prove . The jumper arm is quite thick along its length, i left it that way intentionally, i thought the original was probably very thin, i didnt see that it was already missing. Setting isn't particularly stiff as such just positive, i still need to take it out and polish where it mates with the stem release. 
    • VWatchie
      Without Our Forum

      By VWatchie · Posted

      Yes, "Sold out" is difficult to understand. There doesn't seem to be a lot going on. It's been nine months since any new video was published on the Watch Repair Channel. The Level 4 course on watchfix.com has been in progress for what feels like forever (several years!?). Maybe Mark's enterprises aren't doing well or perhaps already so profitable there's nothing much to motivate him for more material. Or, perhaps these days he's more into crochet. The real reason is probably something entirely different but it would be nice/interesting to know. I don't mean to sound gloomy or pessimistic, but I wouldn't be surprised to be met by an HTTP 404. Every day feels like a gift. Speaking of watchfix.com I've been postponing the "Level 5: Servicing Chronograph Watches" course for a very, very long time. Anyway, I just enrolled on it so it's going to be very interesting to see the videos. I must say, IMO there's nothing really that can compete with Mark's courses when it comes to presentation and video quality. It's simply world-class and makes me associate with some really expensive BBC productions.
×
×
  • Create New...