Jump to content

Armitron 1981 Radio Watch

Radiotron

By Radiotron
in Watch Repairs Help & Advice

 Share

Recommended Posts

Radiotron New Member

Radiotron

Posted
Posted

I just bought an Armitron 1981 FM radio watch. The radio works beautifully in this model, but the watch time does not. I opened her up and found that the batter had badly corroded the negative terminal badly, and after cleaning, the terminal is practically gone. Any advice on replacing the terminal. I have some soldering experience and equipment.

Link to comment
Share on other sites
Gpsluvr WRT Addict

Gpsluvr

Posted
Posted

Well, I’ve not seen anyone else reply, so here goes. We really need a photo, but in lieu of that, I can say I have not had good success trying to solder on those, even with a tiny 15 watt pencil iron. Chances are, you will melt something plastic that it is mounted on at the other end and even if it is gold plated, the metal itself usually doesn’t take solder well. If you can find another one on another busted watch, it would be better to replace it. If I could see a picture of it, I might have something similar in my junk pile. Steve


Sent from my iPad using Tapatalk Pro

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

Hello Radiotron,

 

On this friendly forum before making a post for help or advice. We like new members to introduce themselves. Just say a little about what you do and about yourself.

We like that to go into the Introducing Yourself Here. This is the link.

https://www.watchrepairtalk.com/forum/23-introduce-yourself-here/

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • watchweasol
      Chronograph Pusher Rod for EB8371-67 Snapped and Stuck in Button. Can't Unscrew.

      By watchweasol · Posted

      Hi. Yes I get it , the slot in the end I’d to allow you to screw the button on whilst holding the pusher shaft. To remove the pusher tube you will need a tool such as the one shown by Richard. I think Ali Express the Chinese Amazon has replicas of the Horotec system for a lot less money, how effective they are not having had to use one. But as you said the way to go is complete removal and replacement, bodging it up will  lead to a repeat failure
    • JohnR725
      Notifications

      By JohnR725 · Posted

      It does look like it seems to be working again I'm getting emails.
    • JohnR725
      30T2 adjustment of timing washers

      By JohnR725 · Posted

      One of the things that I've been bothered with lately is timekeeping? For instance a 90-year-old pocket watch what so to timekeeping was it supposed to keep? They publish railroad timekeeping but I don't know how well normal non-railroad watches were supposed to keep time. The reason why the question comes up for me is I spend a lot of time at work adjusting watches to keep really really good time  because I have to please my boss where as when the watch was made I have to wonder what kind timekeeping would've been acceptable. After all they typically didn't have timing machines 100 years ago and they were timing and six positions certainly not for the non-railroad grade watch. On the other hand I do get paid by the hour so maybe I shouldn't be concerned of how much time I Spend trying to make everything keep chronometer timekeeping almost. Citing a Delta of 40 seconds for a 90-year-old watch is quite outstanding.
    • JohnR725
      Is this pallet fork over-locking?

      By JohnR725 · Posted

      That's an interesting question which I don't think I've seen explained anywhere. But I think the problem will go away just about instantaneously. In other words the  coating is really thin and it should go away almost immediately. So the problem should resolve itself extremely fast.  
    • VWatchie
      Is this pallet fork over-locking?

      By VWatchie · Posted

      I experienced that different types of shellac and their ages are affected differently by IPA. Sometimes the shellac dissolves in a few seconds and sometimes several minutes are required. Nowadays I never let shellac come into contact with IPA. It's a hotly debated topic here on WRT if you search. Like John, I don't think you need to worry about the weight of the shellac, but instead that it might start rubbing against something. When I learned how to adjust pallet stones, I tried documenting my experiences in this thread. Hopefully, it can help you. I personally don't believe in the idea of abrading the epilame before oiling so I don't think you need to think or worry about it. The only time I've heard anyone mention this is Alex on the YouTube channel Watch Repair Tutorials but actually no one else. I'm not saying it's "wrong" just that I don't think it's necessary or adds anything.
×
×
  • Create New...