Jump to content

Recommended Posts

Hello, I could not fint any answer to this on any other thread.

Im using Isopropyl alcohol for the last step of hand cleaning movements. However i can not find a good way to throw used liquid away. How do you do it, I know that the liquid will turn into gas eventually however since i fill a small jar there is always going to come times when i need to throw it away. Where do i throw it?

How do you do it?

Thanks in advance, Jakob

Share this post


Link to post
Share on other sites

Burn it indoors in a large can. It,s only lighter fuel. Make sure you soak it up with a cloth or cotton wool first.

I have a large man made rock with a hole part way through the middle.

It's meant to burn indoors as a feature.

Don't be afraid of it a small amount will not cause any problems.

Just do'nt try to pour more in while it is still alight.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By MrRoundel
      Greetings folks. I've been working on watches as a hobby for about 20 years now.  I started out on pocket watches and have never cleaned a clock. In fact, I had a great cleaning machine, with the big jars, and a few other clock tools, that I gave away to an aspiring clock guy over at the Tascione site. But I digress...
      Nearly 20 years ago I bought a Hamilton model 21 ship's chronometer. It's an early one, pre 400 serial number, and is a thing of beauty, as these generally are. Back when I got it, I had a professional service it for me. It was done well, but wasn't cheap. $400-500, IIRC. I used to display it in my living room and run it occasionally just to hear the escapement and marvel it its accuracy. From about 2009 to 2014 it sat in my storage unit, waiting for new digs. In 2014 I wound it up and it took off running. I let it run down and then put it away for a couple of years. When I pulled it out, I discovered that it had a broken balance pivot. While originally I thought someone had knocked it over and wasn't copping to it, but now, after inspecting the upper pivot's wear, I don't think that's the case.
      After botching the first staff I got trying to replace the hub, I set it aside again for the past couple of years. The way I broke the staff was I overestimated how deep the hollowness went in my hollow punch that I was using to tap it on. It bottomed out in the punch and destroyed the pivot.
      Now that I'm finally over that disappointment, I decided to give it another go. I bought a staff that already had the hub installed. I may have to polish the lower pivot, as it doesn't seem to want to set in the hole jewel properly. I'm in the process of verifying all of this. I had to tear down the chronometer at least to the point where I could check to see if the broken part of the pivot was impeding the staff from setting properly. The hole jewel is clear.
      I'm doing the best I can to do it right, and get it running again. I won't be running it, but want it running just in case I should decide to sell it. Otherwise the value drops quite a bit. Since I have it completely torn down now, I might as well clean and oil it. Does anyone have a hot tip on the best cleaning solutions for cleaning these chronometers? I'd like to use something that will cross over and work for my cleaning of watches as well. I have both an ultrasonic and the small L&R mechanical. I have one more fresh batch of cleaner and rinse, petroleum, no-water, formula. Should I use that, or make, or get, something new? Any tips for oil and grease types to get me by? Any suggestions are appreciated.
      I do have the Manual for the movement.
      I know that this is risky business, my working on this chrono, but I just can't afford to spend another $500 to get it running. Plus, I heard that if you're going to run these, you've got to spend this $500 or so to service them every few years. That is not going to happen. Feedback, suggestions, warnings, tips, etc., are all welcome. Many thanks. Cheers.
       
    • By dreja
      Hello,
      I have disassembled the Poljot 2209 movement.
      I would would need your advice, if it is ok to wash also the "double gear" and how to oil it later...
      Thanks
      Andrej

    • By bertmengels
      Hi to you all,
      I was wondering, if you use a regular ultrasonic instead of a watch cleaning machine. How would you rinse your parts? And how many times? In which solutions?
      I always cleaned my parts in the ultra sonic with a solution and rinsed the parts in benzine( that's the way an old watchmaker learned me) but i've found out that very often this does not give me the results i was hoping for. Can I perhaps get little jars with a rinse solution and run those in the ultra sonic? 
      thanks! 
    • By Hayley
      Hi,
      I have managed to get hold of a singing bird cage at a reasonable price after years of trying.
      It's not working...I would like some advice on what solutions to use to clean it as I think it just requires a good clean, nothings broken.
      Can anyone tell me what make of cleaner to use and what lubricant would be best, have attached photo's!
      Thanks
       


    • By Paul78
      I've just changed my cleaning fluid in my Elma cleaner to the Elma WF Pro, I've done one movement, the fluid was clear but now it's gone blue. Does anyone know of this is normal? Or should I change it?
  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • You're exactly correct, the clip needs to go into a groove on the stem. I searched my service photos and enlarged a stem but sorry for the low resolution. Sent from my BBF100-2 using Tapatalk
    • Thank you all for thinking along with me I'll first try Loctite as that feels & seems to me a less intrusive and a very valid option. If that were to fail, an attempt to solder the joint can still be done. The other way around seems less attractive to me. Soldering is still a good option provided, just like with the Loctite, we were to get a proper surface bondage. Loctite doesn't seem to have an issue with different material or surfaces. I'll report back with my findings    
    • Hi Mark, welcome to the forum.  
    • You are not getting the right beat. Either HS is touching something, or the balance+ HS dosn't generate the right beat. If balance complete produces right beat in one 115/1 bifora, it also would in other 115/1 bifora movements.  If balance complete ran right in donor movement, how come you don,t rebuild the donor.
    • Hi, Hi, this is a watch hand press, I always want to have a more sturdy way to install watch hands, but I already own a nice set of Horotec watch hand installing tools, so I don't want to buy a watch hand press if I can just design one using the nice tools I have. So I design one, the dimensions are for Horotec watch hand tools, enjoy.   Watchmaker Tools - Watch Hand Press Inserting Tool  https://www.thingiverse.com/thing:3977411
×
×
  • Create New...