Jump to content

Timex Model 276702572 - Before and After

JerseyMo

By JerseyMo
in Your Watch Collection

 Share

Recommended Posts

JerseyMo Distinguished Member

JerseyMo

Posted
Posted

Just finished up this repair, a classic 1972 model in need of much TLC.

Here is the before  and After, followed by how I got there.

DSC08790.thumb.JPG.3800374468b6c593c819cea944253d18.JPG

DSC08849.thumb.JPG.be03fbdaa21ff5704833b6325808b1e1.JPG

 

and this is how I got there -  pop the case off and unscrew the set lever screw about 2.5 turns.

out comes the movement and the tear down begins. While doing so I see the crystal will have to be replaced as well as the crown\stem.

I also spot an oil spill on the date ring, this means someone has been in here before and did not know what they were doing.

So off we go for the cleaning and rebuild.  Finished watch looks and runs great.

Cleaned, oiled, missing and or worn parts replaced.

How does it look?

 

 

DSC08792.JPG

DSC08793.JPG

DSC08794.JPG

DSC08795.JPG

DSC08796.JPG

DSC08797.JPG

DSC08798.JPG

DSC08799.JPG

DSC08800.JPG

DSC08802.JPG

DSC08803.JPG

DSC08804.JPG

DSC08805.JPG

DSC08806.JPG

DSC08807.JPG

DSC08808.JPG

DSC08809.JPG

DSC08810.JPG

DSC08811.JPG

DSC08812.JPG

DSC08813.JPG

DSC08818.JPG

DSC08819.JPG

DSC08820.JPG

DSC08823.JPG

DSC08824.JPG

DSC08825.JPG

DSC08826.JPG

DSC08827.JPG

DSC08828.JPG

DSC08829.JPG

DSC08830.JPG

DSC08831.JPG

DSC08832.JPG

DSC08833.JPG

DSC08834.JPG

DSC08835.JPG

DSC08836.JPG

DSC08837.JPG

DSC08838.JPG

DSC08839.JPG

DSC08840.JPG

DSC08841.JPG

DSC08842.JPG

DSC08845.JPG

DSC08849.JPG

DSC08850.JPG

  • Like 1
Link to comment
Share on other sites
manodeoro WRT Addict

manodeoro

Posted
Posted
and here it is ready to wear.
 
DSC08851.JPG.5e6521efc3264e324b152217587b80e0.JPG
You really did an awesome job.
I wonder if the bezel was missing a first and if yes where you sourced it.
Having some Kelton watches (Timex's French sisterwatches) I have repaired some of those bezels but when they're lost it's difficult to find one.

Envoyé de mon Moto G (5) Plus en utilisant Tapatalk

Link to comment
Share on other sites
JerseyMo Distinguished Member

JerseyMo

Posted
  • Author
Posted
1 hour ago, manodeoro said:

You really did an awesome job.
I wonder if the bezel was missing a first and if yes where you sourced it.
Having some Kelton watches (Timex's French sisterwatches) I have repaired some of those bezels but when they're lost it's difficult to find one.

Yes, finding NOS Timex bezels is not easy and I have only come across them a few times.  the last coming from a large lot of parts from a New England supply house that had closed down.  It took me 3 months to organize and box up the inventory of hundreds of parts envelopes.

This bezel ring came from another watch and had a crack just to the left of 12.  I was able to use some super glue to get it to hold together.

 

Link to comment
Share on other sites
manodeoro WRT Addict

manodeoro

Posted
Posted



Yes, finding NOS Timex bezels is not easy and I have only come across them a few times.  the last coming from a large lot of parts from a New England supply house that had closed down.  It took me 3 months to organize and box up the inventory of hundreds of parts envelopes.
This bezel ring came from another watch and had a crack just to the left of 12.  I was able to use some super glue to get it to hold together.
 


Now you say that ... I can see the superglue near the 12th.
I have found a way to repair those plastic bezel "from the down side" so that they can snap on the watch rehaut and still be rotatable (seems important to me though that's useless cause those watches are NOT divers).
I have already posted my my method on a French watch forum but I'll write tutorial in English and post it here as soon as I can.
So if you ever fell on one of those bezels broken on 2, 3 or even 4 parts please ring me cause I need 2 of those bezels to finish my last Kelton's.

Envoyé de mon Moto G (5) Plus en utilisant Tapatalk

Link to comment
Share on other sites
JerseyMo Distinguished Member

JerseyMo

Posted
  • Author
Posted (edited)
6 minutes ago, manodeoro said:

Now you say that ... I can see the superglue near the 12th.
I have found a way to repair those plastic bezel "from the down side" so that they can snap on the watch rehaut and still be rotatable (seems important to me though that's useless cause those watches are NOT divers).
I have already posted my my method on a French watch forum but I'll write tutorial in English and post it here as soon as I can.
So if you ever fell on one of those bezels broken on 2, 3 or even 4 parts please ring me cause I need 2 of those bezels to finish my last Kelton's.

Envoyé de mon Moto G (5) Plus en utilisant Tapatalk
 

 

The bezel does rotate very easily and I have now cleaned up the glue on the front.    Yes, please present your method pn how to repair the bezels.  It would be interesting to see how others go about such a task.

Edited by JerseyMo
added information
Link to comment
Share on other sites
manodeoro WRT Addict

manodeoro

Posted
Posted
19 hours ago, JerseyMo said:

The bezel does rotate very easily and I have now cleaned up the glue on the front.    Yes, please present your method pn how to repair the bezels.  It would be interesting to see how others go about such a task.

Hi JerseyMo ... I have posted my repair method here

English is not my native language so fell free to check and help me to edit that tuto

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Unfortunately I'm not that lucky. I started on the train side and after I noticed the binding I pulled everything out except the driving wheel to rule everything else out. It still binds. I'm going to double check that the pinion is fully seated on the staff first, then if no joy I'll push the bridge jewel up a fraction of a mm. Fingers crossed!
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Happy to have helped, great way to start the day with a win! 🥳
    • doober
      Rado rotor removal

      By doober · Posted

      Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Not sure, but just looking at it, it seems like the screw on the right may be a fake? The one on the left may not be a screw in the regular sense at all, rather a 2 position device, I think you need to point the slot towards either of the 2 dots and one will secure and one will open. Like I said this is just my best guess looking at the pictures.
×
×
  • Create New...