Jump to content

Things I learnt the hard way

dieale2
 Share

Recommended Posts

dieale2 Member

dieale2

Posted
Posted

I been at this for about a year and I learnt a lot of things the hard way. I don't see any thread about lessons learn the hard way so I'll start here.

  1. Tea leave holders are not good parts holders. The two halves don't clamp down hard enough and small parts will slip through.
  2. Hairsprings are hard.
  3. Mainsprings are fragile.
  4. Just because someone been in business for 40 years doesn't mean they can't mislead you about vintage watches. Do you homework and don't only take the seller's word.
  5. If you don't know what an expensive vintage watch supposed to look like, don't buy it. 
  6. You will not save money by buying a bunch of "cheap" watches.
  7. You can't (or shouldn't) oil a watch with a single oil and grease.
  8. Organizing a lot of parts is hard.
  • Like 2
  • Thanks 1
Link to comment
Share on other sites
Tmuir Distinguished Member

Tmuir

Posted
Posted

LOL.

I'm with you on point 2 and a gree with you on point 4,5,6 and 7 too.

I've been far too many clocks and watches butchered by so called professional watch and clock repairers.

The best one just last week which had been at a high street shop andamongst all the otehr things wrong with it they tried to put it in poise by soldering lumps of copper to the bimetallic balance.......

  • Like 1
Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted

You said it. Well almost.

May I add section 9 and..

Don,t lean over work bench or the piece. Instead hold your head as if looking streight forward and hold the piece up. 

Have a CT scan of your neck taken and ask your physiotherapist for thorough neck examination.

Make sure you got the right and good quality tools.

 

Take pictures at each disassembly stage if working on unfamiliar piece. 

If ths piece is givng you a hard time, leave it alone till later.

Don,t lend your good tools.

Get a new H/S if the old one  reminds you of macaroni sauce.

 

  • Like 2
Link to comment
Share on other sites
  • 3 weeks later...
Tmuir Distinguished Member

Tmuir

Posted
Posted

Unfortunately I don't have any photos, that was only some of the damage that was done to the watch, the whole movement was a right off. They also lost the hairspring, lost the regulating leaver, broke the jewels on the balance bridge, cracked the glass, lost the winder and tried to bush 2 pivot holes on the bridges and just trashed the bridge.

But very kindly they told the owner there was no charge for the service...............

  • Sad 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      What are these Seitz B-Jewels?

      By Neverenoughwatches · Posted

      If frank says these bombè jewels are for balances and similar pivots then they are used cupped side facing the pivot and then capped i assume. In Nicklesilver's reply i guess that cup can also be reversed and used as an oil reservoir leaving the shoulder riding on a less frictioned domed surface. 🤷‍♂️ Hence the use of them on wheels closer to the escapement that have less torque requiring efforts to reduce friction and are also uncapped.
    • Neverenoughwatches
      Commando special

      By Neverenoughwatches · Posted

      Looks that way, if it had any amount of significant jewel count it would say so on the dial.    Looks that way, if it had any amount of significant jewel count it would say so on the dial.  Same answer as Mike regarding the dial, its often just a slapped on name of a retailer but i thought you were way above this understanding Pete ?
    • Neverenoughwatches
      Gamblin Gamsol for cleaning?

      By Neverenoughwatches · Posted

      Light naptha is what you need to be looking for. The carbon to hydrogen ratio is high with heavy naptha, it doesn't evaporate as well as light naptha and is prone to leaving more residue. Try tom's suggestion of the mirror test.
    • Neverenoughwatches
      I'm going to be setting up a decent little workshop here at home.

      By Neverenoughwatches · Posted

      Its a big item Michael and a lot that could go wrong with the process of getting it to its new location. I once helped install one of these units into a conservatory that i had built. It was big and bloody heavy and took six of us to get it in safely. If you have sliding doors and you need to remove the whole frame then that may or may not go well. But i would advise getting a professional in if you have little knowledge on the installation of them. The glazing of the doors could well be 6mm laminated glass which again will be heavy very heavy if the glazing units are big. The glass would also need to be set up and packed correctly to open the doors properly more so if they are unframed and the sliders are upvc. Seems a shame but if no one is biting and that may be due to having no warranty i guess the only takers might be someone that installs them for a living and knows how to repair. If its fibreglass just be careful, i sometimes have to cut fibreglass baths out and they are nasty to work with . Thick gloves are definitely recommended,  not fun picking out fibreglass spells two days later that have started to go septic. Good luck with it all matey.
    • tomh207
      Gamblin Gamsol for cleaning?

      By tomh207 · Posted

      I don’t know anything about this product, however assuming you have it if you put a drop on a mirror or piece of glass lying flat on a table and leave it to evaporate if it leaves any sort of residue it is not really suitable for watch part cleaning.   Tom
×
×
  • Create New...