Jump to content

Rolex Datejust 1601 replacement hands

cgasgarth

By cgasgarth
in Watch Repairs Help & Advice

 Share

Recommended Posts

cgasgarth New Member

cgasgarth

Posted
Posted

Hey guys, I've recently bought a grey replacement sigma dial for my Datejust and I'm having trouble finding hands to go with it. The dial is a service dial with white gold markers so would that mean the hands should be white gold? The lume is also superluminova so preferably the hands would be the same but if I had to redo the lume on the hands it wouldn't be the end of the world. I've attached a picture of the dial and the watch has a cal 1575 movement. Thanks 

31086EA9-9FCF-46D4-9E95-A0BA6A109B87.png

4505387C-C151-4D8C-918B-7DD6A74BEED8.png

Link to comment
Share on other sites
cgasgarth New Member

cgasgarth

Posted
  • Author
Posted
52 minutes ago, oldhippy said:

 

Hello cgasgarth,

On this friendly forum before making a post for help or advice. We like new members to introduce themselves. So tell us a little about yourself. 

Welp I'm in high school so my budget is a bit tight. My Grail watch is a white gold day date 1803 with a slate dial but those will be near impossible to find when I get to the point where I can afford one. Right now my Grail was a grey dial Datejust but with the prices going up I just bought one the I liked but wasn't perfect so this project is to just fill the hole for it. Hope that helps :)

Link to comment
Share on other sites
Tudor Distinguished Member

Tudor

Posted
Posted

Welcome.

Yes, the "sigma" dial was used to indicate the change to white gold hands and indicies, over the former stainless steel used prior. This change was due to the corrosion of the hands mainly. This dial would probably have the classic straight hands with the lume tracks in their centers. Many sellers have aftermarket ones, but for white gold you may have to wait for a genuine set to come along, and they would most certainly be (non-glowing) Tritium lume material.

What is interesting is that I've never seen a sigma dial using anything other than Tritium, as indicated on the bottom of your dial...

Is this a re-lume perhaps? You indicated it as a service dial, but I've never seen a sigma marked service dial. A luminova replacement would have "SWISS" only at 6 o'clock. I have seen "T<25" marked dials with luminova, (early service dials) but never sigma dials before. I suspect it is an original one that was re-lumed in the past. And from what I can see, it was done very well!

Please correct me, if I'm off base, with some supporting information that lead you to the conclusion it is an original service dial. I'm quite curious...

Link to comment
Share on other sites
cgasgarth New Member

cgasgarth

Posted
  • Author
Posted
12 minutes ago, Tudor said:

Welcome.

Yes, the "sigma" dial was used to indicate the change to white gold hands and indicies, over the former stainless steel used prior. This change was due to the corrosion of the hands mainly. This dial would probably have the classic straight hands with the lume tracks in their centers. Many sellers have aftermarket ones, but for white gold you may have to wait for a genuine set to come along, and they would most certainly be (non-glowing) Tritium lume material.

What is interesting is that I've never seen a sigma dial using anything other than Tritium, as indicated on the bottom of your dial...

Is this a re-lume perhaps? You indicated it as a service dial, but I've never seen a sigma marked service dial. A luminova replacement would have "SWISS" only at 6 o'clock. I have seen "T<25" marked dials with luminova, (early service dials) but never sigma dials before. I suspect it is an original one that was re-lumed in the past. And from what I can see, it was done very well!

Please correct me, if I'm off base, with some supporting information that lead you to the conclusion it is an original service dial. I'm quite curious...

From the info I have from the seller the dial was relumed by RSC which based on how well done it is I can believe. From what I know the Singapore RSC did this for some time instead of outright replacing the dial which makes me very happy if true. Once I get the dial in hand I'll be able to confirm if the markers are white gold or not but I think for the price I paid I got a great deal on a rare dial. 

Link to comment
Share on other sites
cgasgarth New Member

cgasgarth

Posted
  • Author
Posted
1 hour ago, Tudor said:

Well unless the markers were changed for some reason, the sigma indicates they are white gold. 

I'm more saying that because of the slight possibility it could be fake but I just got it in hand and it looks good to me. Anyways back to my problem, do you know where I can source the hands for it? It seems like the cost of the hands isn't much but every Watchmaker I've talked to wants to preform a full service on the watch which for me is too expensive and isn't needed as it was serviced last year and runs perfectly. 

Link to comment
Share on other sites
cgasgarth New Member

cgasgarth

Posted
  • Author
Posted
10 minutes ago, Tudor said:

eBay and the Rolex forum are where I hunt for parts. 

If you want steel ones (though they might have white gold too) try ofrei 

I bought a set of steel ones as a backup but I'm trying to hold out until I get a set of white gold ones, thank you for the tips.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • nickelsilver
      What are these Seitz B-Jewels?

      By nickelsilver · Posted

      It's pronounced "bombay" like the city.  French for bomb is, 😄, bombe, pronounced the same as in English. Bombé, bombe.
    • VanDan
      Bench mat

      By VanDan · Posted

      That's a really good idea! I have a 3d printer, I think I'll design something that I can clip on to the edge of my desk to do the same. Thanks for the idea. 
    • RichardHarris123
      What are these Seitz B-Jewels?

      By RichardHarris123 · Posted

      I looked up bombè, domed in French.  It's pronunciation is bomb, does a bomb (explosive device) get It's name from bombè? I know we're going off subject but it's interesting. 
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Okay, I checked with the fine folks at the McCaw Company, and they agree it's the correct crystal, and they have one in stock, so with that sorted time to get onto assembly. Starting by getting the spring into the barrel, which was a bit harrowing. It took me several tries to get it hooked onto my worn old winder arbor, but I did find a new use for the micrometer stand I just purchased. Carefully dabbed some Kluber P125 braking grease to the left of the divots around the barrel, and a little HP1300 on the floor of the barrel before popping it in--in case you haven't seen it, this is a great illustration I found somewhere on this site. You're not the boss of me, Bulova.   2172_Bulova 11AOAC 11AOACD 11AOACB.pdf Bulova_11 AOAC, D, B(1).pdf I got the train back in and it didn't seem as free as I'd like. Looks like the driving wheel with cannon pinion has zero end shake. That could explain the low amplitutde I started with. Now if you were me, would you push on the plate jewel or the bridge jewel? I've attached some extra pictures in case anyone sees something else I'm doing wrong here.
    • Razz
      What is it about this watch that speaks to me?

      By Razz · Posted

      I have quite a few watch brands from all over the world. For some reason this Timex electric from 1979 is capturing my attention this week. I am not a particularly fond of battery operated watches or Timex, but this one is different for some reason. Post your watch in your collection that seems to draw you in more now than before...
×
×
  • Create New...