Jump to content

How is this for a rip off?

oldhippy

By oldhippy
in All Things Clocks

 Share

Recommended Posts

Tmuir Distinguished Member

Tmuir

Posted
Posted

Says 1895 in the title and then circa 1900 to  1910 in the description.

Mass produced stamped out hands, not a taper pin to be seen anywhere on the clock, no leather pad on the striking hammer

I'm guessing at the oldest late 1960s 1970s.

I've seen that diamond logo on clocks before but cant remember where.

If I came across it for $50 I might be tempted, but not for their asking price.

 

Link to comment
Share on other sites
wls1971 Distinguished Member

wls1971

Posted
Posted

I'm no longer surprised at the over priced crap on Ebay, I do find it very annoying that what this seller is doing is actually fraud he is miss representing a very poor quality clock and selling it as antique, it's criminal and I would suspect he is fully aware of that.

I bought a fantastic four glass ormolu and onyx french clock not long ago from around 1900 for a quarter of that price in excellent condition, only the uninformed would buy the clock he's peddling.

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted

I have reported him to ebay and sent the clown a message.

I sent him this.

It is guaranteed not a reproduction, and is circa 1900-1910

 

Lies. This is a modern repro and I expect it to be made in China. You have been reported to ebay for freud. It is a reproduction and is never circa 1900-1910.

 

I'm a horologist who specialised in high quality antique clocks with around 30 years experience in repairing and restoring.

  • Like 1
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted

Here is the reply.:D

 

Sir, it is not a reproduction, and you are barking up the wrong tree. I have been selling clocks for over 40 years, specializing in chinese antique clocks specifically.  I own a company in china making reproduction fusee clocks and other famous english and french clocks.  I have owned more antique clocks than you will ever think of, and had the largest collection of Chinese antique clocks in the world outside of the Forbidden City in Beijing.  It is antique and made in Japan, not china, and a wonderful clock. Not champleve, and not cloisonne, but a beautiful antique clock.  I suggest that you do research yourself before you make such inaccurate accusations, a clear case for a libel suit.  Keep your thought to yourself until you learn what you are talking about.  You are officially blocked from bidding on anything offered for sale from ProClocks from this day forward.   A copy of this note has been submitted to ebay.  Have a good day, now I highly recommend you start your studies before you put horologist behind your name.

Robert Crowder, BA, Edd. DEd
Horologist
ProClocks, Inc.

  • Like 1
  • Haha 2
Link to comment
Share on other sites
wls1971 Distinguished Member

wls1971

Posted
Posted (edited)

Hmm there are some interesting things in the public domain on the web about Robert Crowder and proclocks, he has been warned in the past by the Nawcc to alter his conduct regarding selling repo clock's and having less than accurate descriptions, there is also a story that he had a table at a selling meet run by the Nawcc his table collapsed sending all his ware's crashing to the ground and smashing them, the rest of the sellers all stood up clapped and cheered.

Edited by wls1971
  • Like 1
Link to comment
Share on other sites
Lenj WRT Addict

Lenj

Posted
Posted
7 hours ago, wls1971 said:

Hmm there are some interesting things in the public domain on the web about Robert Crowder and proclocks, he has been warned in the past by the Nawcc to alter his conduct regarding selling repo clock's and having less than accurate descriptions, there is also a story that he had a table at a selling meet run by the Nawcc his table collapsed sending all his ware's crashing to the ground and smashing them, the rest of the sellers all stood up clapped and cheered.

How embarrassing lol...

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted

He told me that clock was made in Japan. Here is one of the many replies he sent me. So have a good laugh.

Sir, it is not a reproduction, and you are barking up the wrong tree. I have been selling clocks for over 40 years, specializing in chinese antique clocks specifically.  I own a company in china making reproduction fusee clocks and other famous english and french clocks.  I have owned more antique clocks than you will ever think of, and had the largest collection of Chinese antique clocks in the world outside of the Forbidden City in Beijing.  It is antique and made in Japan, not china, and a wonderful clock. Not champleve, and not cloisonne, but a beautiful antique clock.  I suggest that you do research yourself before you make such inaccurate accusations, a clear case for a libel suit.  Keep your thought to yourself until you learn what you are talking about.  You are officially blocked from bidding on anything offered for sale from ProClocks from this day forward.   A copy of this note has been submitted to ebay.  Have a good day, now I highly recommend you start your studies before you put horologist behind your name.

Robert Crowder, BA, Edd. DEd
Horologist
ProClocks, Inc.

 

Reply

Link to comment
Share on other sites
Tmuir Distinguished Member

Tmuir

Posted
Posted

The logo appears to be slightly different, the ones on the electric clock either has rays coming off the top of it, or writing, its hard to tell in the photo, whilst the other one has Trade Mark written on the sides of the diamond, so it may not be the same brand, not that I'm saying I believe the seller that it is over 100 years old.

Link to comment
Share on other sites
Mattaphysics WRT Addict

Mattaphysics

Posted
Posted

Thanks for the good laugh... Now I'm sure you're far too hurt not to be able to bid on any of the snake oil he's pedalling... He should be brought in for fraud. In point of fact he's committing the very definition of fraud: presenting a thing as something that it is not. I mean... Come on.

Oh he's owned more antique clocks than you'll ever know? Yeah the most reproduced antique clocks is what I believe he meant to say.

Sent from my Z956 using Tapatalk

Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted

To oldhippy 

Subject: help on the forum for telling "genuine" from fake

Dear sir, 

I regret joining this forum so late, wnen I think of how much I paid for fake timepieces,

Furthermore  I am affraid of purchasing some high price pieces, I have loved, for this very same reason, which is why I now got so many vintage oris watches. 

Glad to see the genuineness is distinguishable with picture.

Looking forward to recieving your guidence and instructions on how to get such help on our forum.

Respectfully    nucejoe

 

 

Link to comment
Share on other sites
ecodec WRT Addict

ecodec

Posted
Posted (edited)
On 8/3/2018 at 2:18 AM, Mattaphysics said:

Thanks for the good laugh... Now I'm sure you're far too hurt not to be able to bid on any of the snake oil he's pedalling... He should be brought in for fraud. In point of fact he's committing the very definition of fraud: presenting a thing as something that it is not. I mean... Come on.

Oh he's owned more antique clocks than you'll ever know? Yeah the most reproduced antique clocks is what I believe he meant to say.

Sent from my Z956 using Tapatalk
 

 

2 hours ago, oldhippy said:

 

I see the clock is no longer available. I wonder what happened.  

After the discussion it may have been removed from sale or it may have been sold to a satisfied customer; who knows.  I have several clocks, one in particular is a regulator made in 1879 in regular use. I have a German pendulum clock in the loft. Will get it down soon,  it was my father in laws and he repaired the mainspring, I believe it works OK. I will give it a clean and oil and we will see. More later. From ECODEC.

Edited by ecodec
More info.
Link to comment
Share on other sites
  • 1 month later...
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Klassiker
      Landeron 248 hammer and cam interaction

      By Klassiker · Posted

      An update, for everyone who contributed advice, and for those who come after with a similar problem. Based on the answers received, I decided to work on the face of the hammer first. I used a square degussit stone to guarantee a vertical surface to work against, and ground the face back until it was square across 90% of the depth. I was conscious of the risk of removing too much material.* After I'd got the shape how I wanted it, I polished the surface with lapping film. To cut a long story short, it did the trick and the hammer hasn't slipped off the cam since. Of course, that wasn't the end of my problems. Have a look at this video and tell me what you think is wrong. https://youtu.be/sgAUMIPaw98 I solved it by rotating the minute counter finger on the chronograph (seconds) runner relative to the cam.  I'd be interested to hear your opinions on that. It seemed to be the right thing to do, but maybe I've introduced another problem I'm not aware of. * What is the correct relationship between the two hammers and cams, by the way? Should both hammers strike the cams exactly at the same time, or is it correct for the minute counter hammer to be a bit behind the seconds hammer? In this picture, I removed the adjusting screw at 1, and the hammers are contacting the cams simultaneously at 3 and 4. I had to turn the screw down tight to achieve this condition after stoning the seconds hammer and replacing the bridge.
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      It was easy enough to pop off. Once I had the cannon pinion hanging on the blades of the stump, I got my #2 tweezers on the gear attached to the staff and levered it down. That way none of the force was on the brass wheel itself.   I reinstalled it and the bridge, and it looks like a small but reasonable amount of end shake. It also spins easily with a blower. It stops quickly, but I think that's due to the large shoulder and about what I'd expect from this wheel.  
    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Oh, right. For some reason I was picturing a monocoque case in my head. Good looking watch!
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Well said Ross. My reason for the thread, i like many of us dont want to lose the forum, such a well knitted group of individuals i feel. But things can happen out of anyone's control. Would be nice to have something in place just in case, if anyone has any ideas please speak up. 
    • TheQuietMan
      Help please.

      By TheQuietMan · Posted

      Ok thanks Ross, I will give that a try!😁
×
×
  • Create New...