Jump to content

How is this for a rip off?

oldhippy

By oldhippy
in All Things Clocks

 Share

Recommended Posts

Tmuir Distinguished Member

Tmuir

Posted
Posted

Says 1895 in the title and then circa 1900 to  1910 in the description.

Mass produced stamped out hands, not a taper pin to be seen anywhere on the clock, no leather pad on the striking hammer

I'm guessing at the oldest late 1960s 1970s.

I've seen that diamond logo on clocks before but cant remember where.

If I came across it for $50 I might be tempted, but not for their asking price.

 

Link to comment
Share on other sites
wls1971 Distinguished Member

wls1971

Posted
Posted

I'm no longer surprised at the over priced crap on Ebay, I do find it very annoying that what this seller is doing is actually fraud he is miss representing a very poor quality clock and selling it as antique, it's criminal and I would suspect he is fully aware of that.

I bought a fantastic four glass ormolu and onyx french clock not long ago from around 1900 for a quarter of that price in excellent condition, only the uninformed would buy the clock he's peddling.

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted

I have reported him to ebay and sent the clown a message.

I sent him this.

It is guaranteed not a reproduction, and is circa 1900-1910

 

Lies. This is a modern repro and I expect it to be made in China. You have been reported to ebay for freud. It is a reproduction and is never circa 1900-1910.

 

I'm a horologist who specialised in high quality antique clocks with around 30 years experience in repairing and restoring.

  • Like 1
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted

Here is the reply.:D

 

Sir, it is not a reproduction, and you are barking up the wrong tree. I have been selling clocks for over 40 years, specializing in chinese antique clocks specifically.  I own a company in china making reproduction fusee clocks and other famous english and french clocks.  I have owned more antique clocks than you will ever think of, and had the largest collection of Chinese antique clocks in the world outside of the Forbidden City in Beijing.  It is antique and made in Japan, not china, and a wonderful clock. Not champleve, and not cloisonne, but a beautiful antique clock.  I suggest that you do research yourself before you make such inaccurate accusations, a clear case for a libel suit.  Keep your thought to yourself until you learn what you are talking about.  You are officially blocked from bidding on anything offered for sale from ProClocks from this day forward.   A copy of this note has been submitted to ebay.  Have a good day, now I highly recommend you start your studies before you put horologist behind your name.

Robert Crowder, BA, Edd. DEd
Horologist
ProClocks, Inc.

  • Like 1
  • Haha 2
Link to comment
Share on other sites
wls1971 Distinguished Member

wls1971

Posted
Posted (edited)

Hmm there are some interesting things in the public domain on the web about Robert Crowder and proclocks, he has been warned in the past by the Nawcc to alter his conduct regarding selling repo clock's and having less than accurate descriptions, there is also a story that he had a table at a selling meet run by the Nawcc his table collapsed sending all his ware's crashing to the ground and smashing them, the rest of the sellers all stood up clapped and cheered.

Edited by wls1971
  • Like 1
Link to comment
Share on other sites
Lenj WRT Addict

Lenj

Posted
Posted
7 hours ago, wls1971 said:

Hmm there are some interesting things in the public domain on the web about Robert Crowder and proclocks, he has been warned in the past by the Nawcc to alter his conduct regarding selling repo clock's and having less than accurate descriptions, there is also a story that he had a table at a selling meet run by the Nawcc his table collapsed sending all his ware's crashing to the ground and smashing them, the rest of the sellers all stood up clapped and cheered.

How embarrassing lol...

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted

He told me that clock was made in Japan. Here is one of the many replies he sent me. So have a good laugh.

Sir, it is not a reproduction, and you are barking up the wrong tree. I have been selling clocks for over 40 years, specializing in chinese antique clocks specifically.  I own a company in china making reproduction fusee clocks and other famous english and french clocks.  I have owned more antique clocks than you will ever think of, and had the largest collection of Chinese antique clocks in the world outside of the Forbidden City in Beijing.  It is antique and made in Japan, not china, and a wonderful clock. Not champleve, and not cloisonne, but a beautiful antique clock.  I suggest that you do research yourself before you make such inaccurate accusations, a clear case for a libel suit.  Keep your thought to yourself until you learn what you are talking about.  You are officially blocked from bidding on anything offered for sale from ProClocks from this day forward.   A copy of this note has been submitted to ebay.  Have a good day, now I highly recommend you start your studies before you put horologist behind your name.

Robert Crowder, BA, Edd. DEd
Horologist
ProClocks, Inc.

 

Reply

Link to comment
Share on other sites
Tmuir Distinguished Member

Tmuir

Posted
Posted

The logo appears to be slightly different, the ones on the electric clock either has rays coming off the top of it, or writing, its hard to tell in the photo, whilst the other one has Trade Mark written on the sides of the diamond, so it may not be the same brand, not that I'm saying I believe the seller that it is over 100 years old.

Link to comment
Share on other sites
Mattaphysics WRT Addict

Mattaphysics

Posted
Posted

Thanks for the good laugh... Now I'm sure you're far too hurt not to be able to bid on any of the snake oil he's pedalling... He should be brought in for fraud. In point of fact he's committing the very definition of fraud: presenting a thing as something that it is not. I mean... Come on.

Oh he's owned more antique clocks than you'll ever know? Yeah the most reproduced antique clocks is what I believe he meant to say.

Sent from my Z956 using Tapatalk

Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted

To oldhippy 

Subject: help on the forum for telling "genuine" from fake

Dear sir, 

I regret joining this forum so late, wnen I think of how much I paid for fake timepieces,

Furthermore  I am affraid of purchasing some high price pieces, I have loved, for this very same reason, which is why I now got so many vintage oris watches. 

Glad to see the genuineness is distinguishable with picture.

Looking forward to recieving your guidence and instructions on how to get such help on our forum.

Respectfully    nucejoe

 

 

Link to comment
Share on other sites
ecodec WRT Addict

ecodec

Posted
Posted (edited)
On 8/3/2018 at 2:18 AM, Mattaphysics said:

Thanks for the good laugh... Now I'm sure you're far too hurt not to be able to bid on any of the snake oil he's pedalling... He should be brought in for fraud. In point of fact he's committing the very definition of fraud: presenting a thing as something that it is not. I mean... Come on.

Oh he's owned more antique clocks than you'll ever know? Yeah the most reproduced antique clocks is what I believe he meant to say.

Sent from my Z956 using Tapatalk
 

 

2 hours ago, oldhippy said:

 

I see the clock is no longer available. I wonder what happened.  

After the discussion it may have been removed from sale or it may have been sold to a satisfied customer; who knows.  I have several clocks, one in particular is a regulator made in 1879 in regular use. I have a German pendulum clock in the loft. Will get it down soon,  it was my father in laws and he repaired the mainspring, I believe it works OK. I will give it a clean and oil and we will see. More later. From ECODEC.

Edited by ecodec
More info.
Link to comment
Share on other sites
  • 1 month later...
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mikepilk
      Setting lever spring

      By mikepilk · Posted

      The stress is the force (on the spring) x distance. The maximum stress is at the bottom, and decreases up the arm. That's why they always break at the bottom. I used a round file, then something like 2000 grit to finish. I gave the rest of the arm a quick polish - no need for a perfect finish. Just make sure there are no 'notches' left from cutting/filing. The notches act like the perforations in your toilet paper 🤣
    • Geotex
      Any tips to correct a sloppy error?

      By Geotex · Posted

      It's probably a cardinal rule for watch repair to never get distracted while at the bench. Yesterday, after finishing a tricky mainspring winding/barrel insertion (I didn't have a winder and arbor that fit very well) I mentally shifted down a gear once that hurdle was passed. There were other things going on in the room as I put the barrel and cover into the barrel closer and pressed to get that satisfying snap. But when I took it out I realized I never placed the arbor.  When opening a barrel, we are relying on the arbor to transfer a concentrically-distributed force right where it is needed at the internal center of the lid. However, when that isn't present it's difficult to apply pressure or get leverage considering the recessed position of the lid, the small holes in the barrel and the presence of the mainspring coils. It was a beat-up practice movement so I didn't take a lot of time to think it over and I pushed it out using a short right-angle dental probe placed in from the bottom, but that did leave a bit of a scratch and crease in the thin lid. I had also thought about pulling it using a course-threaded screw with a minor thread diameter smaller than the lid hole and a major diameter larger, but that may have done some damage as well.  Thinking about how this might have been handled had it been a more valuable movement, is there a method using watchmaking or other tools that should extract the lid with the least damage? 
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      🤔 what happens if lubrication is placed directly on top of epilame ? Making a small groove so the lubrication doesn't spread across the component but what if when lubing a little overspills and sits on the epilame .
    • Neverenoughwatches
      Setting lever spring

      By Neverenoughwatches · Posted

      Why just the bottom mike ? Is it worth polishing the whole arm ?
    • mikepilk
      Setting lever spring

      By mikepilk · Posted

      The one thing I took time over was to round and polish the curves at the bottom of the jumper arm. The slightest mark (left over from cutting of filing) acts as a stress raiser, just where you don't need it. 
×
×
  • Create New...