Jump to content

Watches for repair hobby on ebay?


Recommended Posts

Hello,

I have been playing with repairing watches for a year now (with one longer break for a couple of months). I have learned some basic things (dissembling, cleaning, oiling, reassembling). I am still learning how to manipulate hair spring, for example. Most of the time, I bought old cheap dirty watches for bargain on ebay and worked on them. Mostly of them were ladies watches (although smaller, they were always cheaper) with ETA movements from 60s and 70s. Here and there I managed to work on Seiko 6309 and 7009 movements. I worked with few pocket watches (which seemed so easy compared to tiny ladies wristwatches).

Now, I would like to step up and concentrate at least on one manufacturer, so I can work constantly on movements, and have spare parts from other. It seems that ETA is the best choice, since I am interested in vintage watches from 50s, 60s, 70s and 80s. There a lot of spare parts on ebay, and again cheap watches which could donate spare parts as well.

Do you have any tips on buying this kind of watches on ebay? What to look for/not to look for?

My general idea would be to concentrate on low cost watches such as Eterna, Doxa, Tissot, Mido, Rado etc. and avoiding rust. What price is generally expected here?

Link to comment
Share on other sites

16 minutes ago, bojan1990 said:

My general idea would be to concentrate on low cost watches such as Eterna, Doxa, Tissot, Mido, Rado etc. and avoiding rust. What price is generally expected here?

It would be impossible to say it's too open a question all those makes you mention have sought after models that command high prices into the thousands in some cases and less sought after models that don't you just have to keep your eyes peeled and learn as much about the subject as you can, find out which models command high prices and sometimes with ebay you get lucky. 

Use the Ebay sold listings button and do the math for yourself you will soon get an idea of what prices they are fetching.

Link to comment
Share on other sites

Now, except for the Unitas 6498, which can be found in many inexpensive Nastrix pocket watches on eBay, I've been using Russian movements to learn watch servicing and repairing. To the best of my knowledge and experience, these Russian movements are some of the most affordable on the market. In some cases, like with the Poljot 2614.2h, the Russians have copied Swiss movements and have adjusted them to be more rugged. There's a really cool article about it here.

An interesting aspect of these movements is that they have their roots in the era of the Soviet Union, meaning that the movements were not the result of a free market, but ordered by the Russian state to provide the masses with a way to tell time. As a result, these movements were designed so that they could be serviced using just tweezers, a couple of screwdrivers, and a bit of watch oil. Ideal for any beginning watch repairer.

As an indication of their affordability, a brand new 32 Jewel Automatic Vostok calibre 2416B is about $40 (and if you buy 10 or more $33). On eBay, you can find fully working Russian watches, that more than likely need service, for less than $20 with free shipping.

My favourite brand is Vostok (sometimes spelt Wostok, Boctok, or восток) especially the Komandirskie and Amphibian models. It was this video that got me into Amphibians. Vostok, Poljot, and Raketa are the big Russian brands.

Needless to say, I'm very fond of Russian watches and movements, and although the appreciation for them isn't that great on WRT (yet), there is a pretty large community found on the F10 forum on watchuseek.com. These watches are also very easy to customize and many do.

 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I dont understand why a patreon membership would have limited places ??
    • Welcome to the forum, enjoy. It’s highly unlikely you will be able to purchase a new bezel look on eBay for a pulsar watch for repair to find a bezel.
    • just one little minor reminder here this isn't your normal balance wheel.  pages 17 and 18 are what you really want to be looking at. normally studs don't turn but this watch has the etachron system designed for lots of adjustment. Personally I would try to rotate the stud back to where it's supposed to be. If you're lucky you didn't actually bend it at the stud it just looks really bad as the stud has been rotated grossly out of position.. I think things will look a lot better if you put the hairspring back where it's supposed to be by rotating the stud. it's hard to tell if you actually did bend it at the stud or not we won't know until you rotate the stud back more or less where it's supposed to be. Then you want to pay attention to the manual of how to put the hairspring back in the regulator pins because yes they rotate also and they rotated specific directions otherwise bad things will happen to your hairspring. so initially you can open up the regulator as wide as it can go and don't worry about closing it until thing everything is right then you can close them a little bit
    • I need to see photos of the whole movement before I comment. 
    • Hi @Jon, so, from one extreme to another the beat error is 0.1(min.pos) to 0.2(msx.pos), and as you mentioned the rate does up and down dramatically. Also checked the position of the collet, and the collet is not central to the jewel on the balance cock. Balance moves freely, per my understanding.   So, after 24h the ampl. fell down by approx 20 deg, which I would assume is expected. After adjusting the endshake I believe I gained around +10 deg. of balance movement. Which is great, and overall the balance is not at 220'ish deg.   What I did next, some might think is non-orthodox, but was wort a try. I too the mainspring out, checked again for endshake and if the pin moves freely, and cleaned everything. Usually when installing the mainspring I would use some barrel grease on the barrel walls, install the spring and put a 2-3 drops of D-5 oil on top of the wounded spring and in the places where the arbor sits. This time I took the spring and applied a ultra this coat of Molykote Dx paste on the whole spring, before installing it in to the barrel, and added some oil to the arbor as usual.  The result improved, at a full wound the balance produces about 230-237 deg. @JohnR725 I'm getting closer to 300 😃   What I am noticing, there is a fluctuation in amplitude. With time it would rise and drop about total 8-10 deg in an interval about 2 minutes. I assumed this ruled out the power transfer from the barrel itself. So I took the gear train out, cleaned and lubed. 
×
×
  • Create New...