Jump to content

Landeron 48 hands on Delbana.


Recommended Posts

Try Omega chrono sub hands. Like the 821 caliber (or 321 but those get silly expensive)

I used an Omega running seconds sub dial hand (the left one) on an a Valjoux 7734 that worked perfectly. The minute counter (right sub dial) needs to be broached slightly.

Check at www.ofrei.com as I believe they list the diameters of the pinions of the hands in most cases.

  • Like 1
Link to comment
Share on other sites

19 minutes ago, Tudor said:

Try Omega chrono sub hands. Like the 821 caliber (or 321 but those get silly expensive)

I used an Omega running seconds sub dial hand (the left one) on an a Valjoux 7734 that worked perfectly. The minute counter (right sub dial) needs to be broached slightly.

Check at www.ofrei.com as I believe they list the diameters of the pinions of the hands in most cases.

Thanks . I will do. Have a couple of  old mark II hands here somewhere. 

Link to comment
Share on other sites

Cool. I’m pretty sure all Mk. IIs are 821. Mines a ‘69 and it is. I think the 321 was dropped in ‘67...

all that said I think the subdial pinions are the same diameter... reasonably sure the running seconds hand will fit. 

  • Like 1
Link to comment
Share on other sites



×
×
  • Create New...