Rolex 3085 rotor spring clip required

[clockboy]

Just on the off chance has anyone have inter stash a Rolex 3085 rotor spring clip. I am servicing a Rolex 3085 GMT master and when opening the case the Auto rotor was loose. On investigation the jewel bearing had been pushed out and the rotor spring clip that holds it to the bridge was broken. If you look at Marks vid on the 3085 GMT master you can see the clip required. I have ordered some small 1.3mm C clips but not sure they will work.

     

[Delgetti]

I think there are 4 versions of this part varying in thickness:

Rolex-Part-No. (thickness)

5066 (0.135)

5066-1 (0.150)

5066-2 (0.165)

5066-3 (0.180)

There are several parts available on ebay (expensive, of course, Rolex is special ;-) ).

Erik

[clockboy]

Thanks Erik. I have the drawings for the 3085 and it shows the clip BUT no part No.
measuring the old clip is is 0.180 mm. 

[clockboy]

UPDATE: I might have found a generic clip from Cousins. I will keep you guys informed of it fits.