Jump to content
  • Similar Content

    • By anilv
      Hi guys,
      Thought I'd share some pics of my Oris Big crown with pointer-date (circa 2009?).
      Simple classic design and quite in the spirit of the older Oris watches.

      The case back gives a good view of the ETA2836 inside. The red rotor was a Oris touch. The edge of the caseback has a coin-edged design, similar to the front of the watch. This improves the look of the caseback as the metal edge would look too big otherwise. Increasing the display window wouldn't work I think as that would only show the movement holding ring.

      The line is still pretty decent..

      And the bracelet is nice and supple.

      But the design of the clasp is a bit plain.

      Oris deserves credit as it was one of the brands which was instrumental in bringing back the Swiss watch industry back from brink of the abyss. In the late. 80s and early nineties, their classically designed watches using ETA movements sold well by focussing on the mechanical movements and using it as their USP. Their tag-line at the time was 'high-much', as seen on the rotor in the movement pic above.
      This watch came my way as a part exchange for an Omega Constellation. The previous owner had gotten the Swiss watch bug but as he got deeper into the hobby he started to appreciate other brands. To be specific, he was  getting into the 'manufacturer' brands as opposed to 'ebauche' brands. It's a shame as this watch is quite good as it is. Ah well, the previous owner should be into Pateks by now!.
      Anilv
       
    • By mjtaven
      Can't stop wearing it !

    • By Ajayel
      Yesterday my Oris watch hit a tiled floor when the strap pin broke and the back crystal popped off. Being in a rush , I quickly pressed it back into position and left it for later investigation.

      Today the crystal seems to be fixed in position, but I have no experience of removing or replacing these. Was a simple press of the thumb strong enough to do the job? How can I check, other then testing with my thumb nail. Are these a simple pop on fixing?
       
      Many thanks.
  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Dear all, I recently had the pleasure of finding a damaged hairspring needing care. My first! It’s an inexpensive orient watch, gaining 20 minutes a day. I am taking Mark’s fault finding course, and have other inexpensive hairsprings to practise with. I also got some vintage tools I’d love to use. Until now for me levellers were only the Oliver Cromwell people, but ebay never ceases to surprise... I could pass the first stages of correcting the coil, with two tweezers. But could not find a use for the vintage tools. Could you help me to figure it out?  Picture 1 is the bent hairspring  picture 2 and 3 the box of tas levellers picture 4 is the hairspring suffering under my tweezers now picture 5 shows the tip of the tools picture 6: from De Carle. Would this be the purpose of the levellers? The overcoil? 
    • my first running watch was an Wyler squire.  i wore the case out,  the mvt. would fall out at work.  i still have it and another with a similar case.   vin
    • First watch was a Kered    from Shepherds of the shambles in York, alas no longer in business. The plus side is I still have the watch it was a 21st birthday pressie, and even better it still ticks  54 years later although the dial has a water mark ,    I even wore it playing cricket for 12 years. 
    • Hi  Whats the possibility of building a frame fitted to the desk  with an overhead flourescent tube or double tube assembly over the work area, Inconjunction with the desk lamp it should minimise the shadows.  If the height is made adjustable up/down it would be even better. 
    • My first watch was a Adram divers watch with a EB 8012 movement. This was a birthday present and was subsequently the first way I attempted to repair (age 11). Ironically a few years ago my brother found it and I re-furbished it as it runs great. 
×
×
  • Create New...