Jump to content

Seiko 4110-9007

moldy

By moldy
in Watch Repairs Help & Advice

 Share

Recommended Posts

moldy New Member

moldy

Posted
Posted

Hi - I have recently received a couple of my grandfather's old watches. The only one that my local watch repairer doesn't think is fixable is a Seiko 4110-9007 (about 1973, I believe). The repairer has told me that the circuit board is at fault - but the rest of the watch is in workable condition.

If anybody is able to give me any information about these circuit boards, or whether they are remotely possible of being fixed (or replaced with an alternative - as Seiko Australia can give me absolutely no information), I would be very grateful.

Thanks in advance
Richard

Link to comment
Share on other sites
moldy New Member

moldy

Posted
  • Author
Posted
5 minutes ago, jdm said:

Isn't possible to get discontinues parts. At best you can find a watch with a donor movement or a new quartz module that fits.

Thanks for the quick reply JDM - would the donor movement / quartz module need to be from an identical watch? Or is the circuit itself likely to be repairable by a electrics repairer?

Sorry - I really haven't got a clue about watches - I'm just very motivated to get this watch working if possible!

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
2 minutes ago, moldy said:

If anyone on here has a watch that might be suitable - and you might be willing to let it go - please let me know!

You can also look on Y! Japan, but may cost you more due to the need to use a buying agent.

Link to comment
Share on other sites
moldy New Member

moldy

Posted
  • Author
Posted

Possibly barking up the wrong tree - but I have stumbled across the following website (http://stsupplyonline.com/catalog/circuits-c-420_798_915.html?page=2&sort=2a), which lists Part 4000 587 - which is also listed in a Seiko Quartz Cal.4110A Parts List pfd I've found (here: http://guides.mccawcompany.com/seiko/seiko-4110a.html).

Seems to be the part number for the "circuit block with crystal oscillator & trimmer condenser".

Surely no chance this is selling NOS after this long?

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
21 minutes ago, moldy said:

Surely no chance this is selling NOS after this long?

Listed price is $42.50. You need to call them, they are not the easier material house for an individual to buy a single part with oversea shipping.

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted

Also, if you get your repair person to measure hands size you could use a new SII (Seiko) VX12E. These cost only $10 or so and give a sure result compared to replace parts on an old mov.t which, in the end, may not run.

Link to comment
Share on other sites
Pip WRT Addict

Pip

Posted
Posted

Keep an eye on eBay, parts come up including nos parts regularly. Although some parts I’ve had a search programmed for a year so you may need to be patient! As already said, the first four digits are the movement and the second four the case and style so you only need search the first four.
Anyway, here is an extract from the 4110 movement parts list that hopefully shows the bits you want.
6888db284e11475695a38829cdc67d28.png


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites
moldy New Member

moldy

Posted
  • Author
Posted
9 hours ago, jdm said:

Listed price is $42.50. You need to call them, they are not the easier material house for an individual to buy a single part with oversea shipping.

Thanks JDM - I'll get in touch with them. If the deal is better for Americans, I should be able to use a freight forwarding service 

I'll also keep that new movement up my sleeve. I'm in two minds about that. Certainly sound like a cheaper and more reliable option though. 

The local guy reckons that the rest of the interior looks good, just that circuit board gone. So there seems to be some nostalgic tugging at me to try and preserve it (although, I realised this is not a particularly special watch - just special to me).

9 hours ago, rogart63 said:

Check with a guy that has VTA in Australia. If i understand correct you are from AU also? He is a great guy and could maybe help you out with parts. http://www.vintagetimeaustralia.com/VTA/watch-service/

Cheers Rogart63 - yep, I'm an Aussie. Down in chilly Hobart! I'll also reach out to VTA and see what he reckons.

7 hours ago, Pip said:

Anyway, here is an extract from the 4110 movement parts list that hopefully shows the bits you want.

Thanks Pip - if I have no luck with the other options, I'll head to eBay!

  • Like 1
Link to comment
Share on other sites
Pip WRT Addict

Pip

Posted
Posted
Thanks Pip - if I have no luck with the other options, I'll head to eBay!

If you’re in Hobart there’s a good guy I know there called Tristan. Not a repairer but very knowledgeable on Japanese and has brought many a quartz back from the dead. Drop me a pm if you’re interested and I’ll see if I can get you in touch with him.


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites
moldy New Member

moldy

Posted
  • Author
Posted
21 hours ago, jdm said:

Also, if you get your repair person to measure hands size you could use a new SII (Seiko) VX12E. These cost only $10 or so and give a sure result compared to replace parts on an old mov.t which, in the end, may not run.

Hey JDM - I just did a quick search on these movements out of curiosity. They seem to all have a date function. My watch is identical to the one in the picture attached (no date etc - just hour and minute hands). Is SII VX12E the right replacement for this?

4B2A6784-02DB-47CE-B1ED-3419F2A5BADD.jpeg

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
1 hour ago, moldy said:

Hey JDM - I just did a quick search on these movements out of curiosity. They seem to all have a date function. My watch is identical to the one in the picture attached (no date etc - just hour and minute hands). Is SII VX12E the right replacement for this?

Seiko doesn't manufacture a 8-3/4‴  2 hands only. Even the original 4110 had seconds. You could also use a VJ14 or VJ19. Date ring would not be visibile or can be removed.
What has to be checked is hands arbor size and heigth.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Unfortunately I'm not that lucky. I started on the train side and after I noticed the binding I pulled everything out except the driving wheel to rule everything else out. It still binds. I'm going to double check that the pinion is fully seated on the staff first, then if no joy I'll push the bridge jewel up a fraction of a mm. Fingers crossed!
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Happy to have helped, great way to start the day with a win! 🥳
    • doober
      Rado rotor removal

      By doober · Posted

      Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Not sure, but just looking at it, it seems like the screw on the right may be a fake? The one on the left may not be a screw in the regular sense at all, rather a 2 position device, I think you need to point the slot towards either of the 2 dots and one will secure and one will open. Like I said this is just my best guess looking at the pictures.
×
×
  • Create New...