Jump to content

Just Done With A Project That Resulted In Two...


bobm12

Recommended Posts

Thank you for the nice words guys! Much appreciated! You guys rock! Geo, coming from you that's high praise, I've seen your restorations here and they are quite at another level!

 

Yes, Lawson, the exhibition back is really something, isn't it?. It is an easy and real nice movement to work on ( and big) but with details during assembly that makes it interesting!

 

Also, the cases came well protected and with a plastic protector on both crystals (so Don, I didn't have to source them at all but I believe Esslinger has some)...which I forgot to remove to take the pictures for all but 2 of them pictures! :(

 

The plastic parts box in the picture, which I got from either ofrei or esslinger, -- can't remember which -- contains one more 6498 I nabbed from the bay. At this time, it has been cleaned and re assembled and is ticking away happily in a provisional plastic container waiting for its future "home". This one, being "silver" colored, might need a new blue set of screws but I'm still thinking about it.

 

So, in brief, the Swiss movement in the yellow case (ebay) was restored and serviced. I replaced the crown and ratchet wheels (rusty and damaged), also replaced the original screws with blue ones, lost one part of the mainspring barrel and was forced to order a complete barrel replacement from ofrei (peace of mind) and finally straightened the hairspring as per mark's videos. The band I had it around (new) from a big Chinese watch I never used but looks the part. So far it is keeping excellent time and will time graph soon.

 

The other one, I had somewhere a -- maybe fake? -- panerai dial, sourced the movement (new 6497 equivalent) and both the case and wristband from the bay and voila!

 

On both cases the hands were from ofrei. Took me a while to decide about what to choose.

 

So, today I'm wearing the yellow one to work!

Edited by bobm12
Link to comment
Share on other sites

Thank you Don! I'm glad you found them. Normally, ofrei has better prices by not much in many things but it is not too user friendly to find stuff in their site. On the other hand, they are great people though and if in doubt you can always call or email them. You even get Bob Frei to take care of you personally and he has a vast knowledge and many a solution for any watch problem.

Link to comment
Share on other sites

  • 4 years later...
3 hours ago, remadepreacher said:

Bob, you mention replacing the screws with blued ones (can't tell much from the pictures). Two questions: are they nicely finished and where did you find them?

Bob hasn't posted in a very long time, and nobody knows why.

Link to comment
Share on other sites

  • 3 months later...

Nice work! I have a similar pair but the Asian ST36/6497 is giving me fits. Keep breaking the set lever screw - the one you have to loosen to remove the stem. Time for movement #3, unless I can find a suitable set lever screw. The genuine 6498 is so good I’m thinking of ditching the Chinese 6497 copy for a real one. Anyway your pics inspired me to keep going!
f500e09ce6ca8fb539a66816df62d507.jpg134264abdac4a86010207bb929ed4d91.jpg


Sent from my iPhone using Tapatalk Pro

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I voted leave too, my reasoning was the the EU is undemocratic, no elected officials. I don't regret it but I  am sad that both sides acted like petulant toddlers.  Shameful.  I'm not on other forums but if I was and left this site, would you shun me? Of course not, we aren't petulant toddlers.  
    • This is a type of tool that may be suitable to remove the bezel - though note that I'm pretty sure the watch should be face down - not face up, as in some of the photos of these tools on amazon & ebay! If you try one one of those, put the movement screws back in first to avoid accidents. https://www.amazon.co.uk/Removal-Professional-Remover-Watchmaker-Diameter/dp/B09XCH4QVN?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&smid=A296NCMMFVXSDN&th=1  
    • Hi, I’m constantly asking my wife to help me with removing the stem in order to complete casing. To expand, this is not a challenge for me when the setting lever is secured by a screw (older calibers). However when the setting lever is attached to a spring loaded setting lever axel, like on more modern calibers, I simply don’t see how to apply enough pressure on the button to get the stem out short of putting the movement face down with the dial and hands attached, which I’m loath to do in order to avoid damaging the dial/hands? what technique should I be using? thanks  
    • Many thanks for your advice (being borne in mind at present) & offer Dell. When I was given the clock the plastic anchor was loose on the arbour (it had split at the 'hole') &, after repairing this, I have been trying to determine whether the spindle (pin) should be perpendicular when the pallet is sitting on a flat surface; or whether, when installed, its L-R extremes (or alternatively its tick & tock points) should lie at equal angles from the vertical when moved with spring absent. I can get the clock to run but in every such configuration the top block has to be turned anti-clockwise (from above) by quite a bit in order to be 'in beat' & it always runs fast (despite the pendulum being set to as slow as possible). This makes me wonder if there is any particular feature of/fault in a torsion spring clock which determines which turn direction (if any) is necessary to get it 'in beat'; & whether there would be a different set of settings that would get it running nearer to time at somewhere around the mid timing/inertia position which would then allow tweaking of the fast/slow setting.
    • Now this has happened I bet China or India just to name two will start to produce none genuine parts.  I did. But idiot Boris Johnson failed miserably in his negotiations. The E U stitched up the UK like a kipper. Nigel Farage  offered his help but big head Boris declined. So this is why we are in this mess all because Johnson wasn't clever enough.  
×
×
  • Create New...