Jump to content

Elma Watch Cleaning Machine


Recommended Posts

Its getting exciting now Geo, I have finally decided to etch, and coat the casing parts with a few layers of clear lacquer, after all the hard work of removing all the paint, and all the wire wool, and sanding work, it would be a shame to hide it all under a colour paint :)

 

I have taken photographs of the wiring, so I know how to rewire it, I did initially plan on replacing the large speed controller, but I think I will reuse it as its still working, so too is the motor, and the heater, the latter looks newer than the other components, so I would imagine the heater has been renewed at some point.

Edited by SSTEEL
Link to comment
Share on other sites

  • 2 weeks later...

I am so impressed - it's going to be like a new machine.

 

Now I wonder - would it be beneficial to coat the inside of the drying chamber with that heat resistant car paint, the one you would use on an engine for example. Probably overkill?

 

Maybe even under the heating element too - to prevent corrosion?

Link to comment
Share on other sites

Starting to think maybe I should of started a separate thread for my Elma Super Elite restoration.

 

Anyway, new varnish in, and final parts now after two coats, a final coat on everything, then will polish the parts to remove any overspray.

 

15607567849_a9bc0cc8c3.jpgUntitled by Micky.!, on Flickr

 

15607989078_c8c34f4425.jpgUntitled by Micky.!, on Flickr

 

15793391765_635f4b2fc8.jpgUntitled by Micky.!, on Flickr

 

15173955973_a11edd0493.jpgUntitled by Micky.!, on Flickr

 

15607570279_414f3e1580.jpgUntitled by Micky.!, on Flickr

 

15173440034_59b106f91c.jpgUntitled by Micky.!, on Flickr

Link to comment
Share on other sites

And a few shots now the clear varnish has dried :)

 

 

 

 

15609339097_738cf6d1bc.jpgUntitled by Micky.!, on Flickr

 

 

 

15770825626_e2e2b0ca0a.jpgUntitled by Micky.!, on Flickr

 

15609661890_93c07e0047.jpgUntitled by Micky.!, on Flickr

 

15608676819_7899de3bb1.jpgUntitled by Micky.!, on Flickr

 

The cast alloy parts, although come out ok, they are not as glossy and smooth as the aluminium case parts, so will need a few more coats tomorrow.

 

15794505745_67e232b52f.jpgUntitled by Micky.!, on Flickr

 

15770829526_5d8ee02e71.jpgUntitled by Micky.!, on Flickr

 

15609098308_d64dfabaef.jpgUntitled by Micky.!, on Flickr

 

15175067273_d26cf5763d.jpgUntitled by Micky.!, on Flickr

 

And the base needs one more coat...

 

15794508715_542d01acde.jpgUntitled by Micky.!, on Flickr

 

15609347137_884263aecf.jpgUntitled by Micky.!, on Flickr

 

15794510935_b5178bbf1d.jpgUntitled by Micky.!, on Flickr

Edited by SSTEEL
Link to comment
Share on other sites

Lovely gloss finish you have there Micky, when does assembly start?

 

Thanks, all being well rewiring will start next week, quite busy with work during the week, so only have time at the weekends.

 

I love how it is coming out! Great job!

 

Thank you :)

Link to comment
Share on other sites

Thanks, the wiring looks like a nightmare, but luckily I was wise enough to take photos of the various wiring, and connections which should help the rewiring :)

 

Anyhow, some goodies in from Cousinsuk..

 

Complete basket, this is the alternative to the obsolete Elma item..

 

15812312405_15a73d4717.jpgUntitled by Micky.!, on Flickr

 

15627463660_2f33fce27c.jpgUntitled by Micky.!, on Flickr

 

Gasket for the Motor (Seals baskets in the jars, preventing spash-back.

 

15626912998_a1dbe93865.jpgUntitled by Micky.!, on Flickr

 

Heater switch..

 

15810428181_0655d289c5.jpgUntitled by Micky.!, on Flickr

 

And new bulb.  I was contemplating fitting a modern motor speed adjuster, and LED light but seeing as the old parts are still working, I serviced them, and they should be fine for some yers to come all being well..

 

15812315875_0c49552757.jpgUntitled by Micky.!, on Flickr

Link to comment
Share on other sites

OK - I'm jealous, I want a blue basket!!! Mine is boring grey.

 

:D

 

Top tip: If you ever need more of the little baskets (you can never have enough IMO) then I usually buy them from this guy - quarter of the price of Cousins:

http://www.ebay.de/itm/Siebkapsel-z-B-fur-Elma-Reinigungsmaschinen-/141412294943?pt=Uhrmacherwerkzeug&hash=item20ecd4611f

  • Like 3
Link to comment
Share on other sites

Wow! Nice and professional! Micky that's one mean machine you are putting together! I bet it will be better than new! Keep it up, great job! If I were a watch I'll be anxious to get a bath in that machine!

 

@Mark: Hi Mark, nice link, how do they compare in size to the Bergeon ones? I'd like to buy a couple myself!

Edited by bobm12
Link to comment
Share on other sites

Wow! Nice and professional! Micky that's one mean machine you are putting together! I bet it will be better than new! Keep it up, great job! If I were a watch I'll be anxious to get a bath in that machine!

 

@Mark: Hi Mark, nice link, how do they compare in size to the Bergeon ones? I'd like to buy a couple myself!

 

Sorry Bob, but I never purchased the Bergeon ones so I can't compare.

 

 

Nice link Mark wondering if they fit the L&R

 

Yes - I think they do fit the six compartment tray.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
    • Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
×
×
  • Create New...