Jump to content

Renata vs Energizer Batteries which is better?


Recommended Posts

I use nothing but Renata as I've yet to have one leak and ruin a watch.  Not that that means anything.  It just has not happened to me yet.  I have had however, several watches with Energizers and others, that have leaked in the watch.  It would be nice if some of you who are in the watch repair field could weigh in on this.    Personally, it's totally unacceptable for a watch battery to leak.

Link to comment
Share on other sites

8 minutes ago, Khronos said:

 Personally, it's totally unacceptable for a watch battery to leak.

When the charge is exhausted, chemicals become acid and may corrode case and leak. I have never seen any battery manufactured promise in writing a protection for that.

Solution, do not leave discharged batteries in watches.

Link to comment
Share on other sites

Yes, JDM, I totally agree, but the reality is people leave dead batteries in watches and some battery manufactures really do things on the cheap that make the problem way worse.  But yes, it's going to be a continuous problem.  The down side of batteries.  On a side note, I've had problems with AA and AAA batteries but since switching to Lithium the problem is gone.  The point is, I suspect the problem could be solved and yes, I'd be happy to pay twice or three times the price for such a quality battery. 

Link to comment
Share on other sites

20 minutes ago, Khronos said:

The point is, I suspect the problem could be solved and yes, I'd be happy to pay twice or three times the price for such a quality battery. 

For the most common sizes, Renata now offers a Premium type. Among the features they list:

State of the art leak proofness thanks to a new sophisticated sealing process

So I have to stand corrected about makers not making claims in this area.

 

Link to comment
Share on other sites

To  put my 5 eggs in,  I use Renata, Sony and Maxell and have never had a problem. I recently had a Ladies Rotary that the battery had leaked in. A local franchised shoe repairer had forced the battery out and  lost the insulator,  then told the owner that it was BER !. I gave it the treatment and it left me OK. I do not know what the original battery make was. (All made in China I believe) He was probably OK with boots and shoes !!!.

Link to comment
Share on other sites

  • 2 years later...
On 6/2/2018 at 12:53 PM, Khronos said:

I use nothing but Renata as I've yet to have one leak and ruin a watch.  Not that that means anything.  It just has not happened to me yet.  I have had however, several watches with Energizers and others, that have leaked in the watch.  It would be nice if some of you who are in the watch repair field could weigh in on this.    Personally, it's totally unacceptable for a watch battery to leak.

they both leak, the problem is to leave the dead battery inside to long, or if the watch is not sealed and moisture manages to get inside the watch that would also cause the battery to leak

Link to comment
Share on other sites

I've seen many brands of batteries leak. But the question is whether they were original or fakes?

I suspect that some repairers are sourcing for the best bargains online. If you take a look at AliExpress and Amazon, there are batteries that are ridiculously cheap. Once it is out of its packaging, it would be really difficult to tell its authenticity. 

Link to comment
Share on other sites

Searching on Google according to them Renata are the best. They are also the battery of choice fitted by premier Swiss watch houses including Tag HEUER, Breitling, Chopard and even Rolex for their quartz collections.

Link to comment
Share on other sites

Renata are part of the Swatch Group so I assume would have a vested interest in quality required for watches.  I always use Renata and have had no problems with leakage.  Leakage problems encountered usually due to low quality batteries or not silver oxide type fitted. Similarly I would expect Seizaiken (Seiko) batteries would be ok.

Edited by canthus
Link to comment
Share on other sites

  • 4 months later...

It depends, if you ask Americans they will tell you renata because Americans hate anything made in the USA, if you ask a outside the US people will tell you energizer because they like American stuff, in my own experience both batteries are good, same quality same battery, no difference.

Link to comment
Share on other sites

Having only just started watch repairing I don't have a long history to refer back to, but I have looked a quite a few Quartz watches for friends and neighbours that have been left in draws for in some cases many years, so all the batteries were long dead.  Not one of them showed any sign of leaking, and all sprang into life with a new battery.

I did have some selection packs of Kodak branded watch batteries bought before I knew better, and some of those leaked whilst still in their packaging, so these were never used in a watch, but were used in other gadgets I had that needed small batteries.

I tend to buy Maxell for watches now.

On a side note in the electronic repair world Duracell and Energizer AA batteries are well know for their fondness to leak so don't risk anything from them these days.

Paul

Link to comment
Share on other sites

  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I also just realized I had that tech bulletin saved...but in French for some reason 🙂 No, I don't speak French. 2172_Bulova 11AOAC 11AOACD 11AOACB.pdf
    • Thanks for the replies. I did the job today and found that the oversized stem fitted just perfectly into the worn mainplate without any adjustment. Original stem diameter was 1.24mm and the oversized was 1.40mm. I did have to make an adjustment to the setting lever though. The small pip that engages with the groove in the stem hub was slightly to wide. I made that a bit smaller with a fine file. Don't ask me why that was too big, it just was. All working very well now. No wobble and not pulling out. New crown fitted as good measure.
    • Hi Vandan. Hi from a fellow newbie! Marshall has got a lot to answer for hasn't he! 😄. I also got hooked to this hobby after watching his videos.  Good luck with your journey to service your Grandfather's watch.   Nick 
    • Hi all, I have a lovely Favre-Lueba dress watch from late 70s/early 80s in a stainless steel case.  Its an unusual curved rectangular case and crystal.  I'm wondering if there's any possibility I might be able to buy/find a replacement crystal for this watch.  The base of the crystal is also curved to match the case, rather than flat.  I'm looking at the Cousins website page here https://www.cousinsuk.com/product/rectsq-rounded-corners-one-side-curved-bezel-sternkreuz-rzr but not sure if I'm looking for the correct type.  In my case its a rectanglular crystal with rounded corners, and both the upper and lower surfaces of the crystal are curved.   Update - OK I now think I know what I'm looking for, but Cousins don't stock the size I need :-).  I think I need a Sternkruez RZ 315x220R9, acrylic, cylindrically domed with rounded corners.  Any tips or alternate sources for this type of crystal? Many thanks
×
×
  • Create New...