Jump to content

Venus 170 problem


Recommended Posts

Hi everyone !

I got quick question about Venus 170 at first the hands are stiff to turn so I put oil on the pivot, and is trun freely , but now the gear probably hade to much lubricate and cause the gear to run free ( hours hand and minute not move) do I have to remove the oli by cleaning the gear or is maybe a different problem like loosen and need to tighten up ? 

Thank you ! 

IMG_20180602_000152.jpg

Link to comment
Share on other sites

Those are 2 gears/parts one inside the other right ?

There needs to be a bit more friction between the two so that the gear that gets to turn the other gears that turn the hands will not slip.

Link to comment
Share on other sites

6 hours ago, Chopin said:

Those are 2 gears/parts one inside the other right ?

There needs to be a bit more friction between the two so that the gear that gets to turn the other gears that turn the hands will not slip.

Might be need to tighten up , will try that.

Link to comment
Share on other sites



×
×
  • Create New...