Jump to content

Heirloom watches


omx5o

Recommended Posts

Afternoon,

I have a couple of nice heirloom watches passed down to me from my great grandfather and his brother. They date from around 1900. One is solid silver case and the other appears to be a solid 9k gold case, judging by the numerous dents in the case material, and it feels quite different to the gold-filled watches that I've handled recently.

My newly acquired knowledge in antique watches is limited to American types, so these two look unfamiliar to me. I was wondering if any of you folks could help identify the manufacturer from these images. They are in very good condition and have been well looked after. The dials have no text, but one has minute markers up to 60 and the other has minute markers up to 300.

Thanks,

Peter

IMG_20180527_131315178.jpg

IMG_20180527_131517891.jpg

Link to comment
Share on other sites

The first appears to be Swiss pin set of very good quality and has  whats called a counter poised pallet fork sometimes called a moustache pallet  fork due to its distinct shape these are an attempt to move the center of gravity closer to the pivots it was thought to improve accuracy its more commonly seen on American high end pocket watches, but this type of pallet fork was used for quite a while by high end Swiss manufactures such as Patek in their chronometer pocket watches and Vacheron,  The jewels of both balance and anchor appear to be diamond its a quality watch.

The other is a pocket watch with center seconds stop lever on the side .

Hallmarks on the cases will give you the dates of manufacture and perhaps clues as to who made them more photos would help in identifying them, both very nice watches to have.

 

Link to comment
Share on other sites

Thanks for that. That does sound very interesting. Yes, I noticed the pallet fork was shaped like a moustache. A couple of years ago before I became interested in watches I tried to do a quick check online for watches with a similar dial and I thought Vacheron was a potential contender, simply by comparing photos online.

I'll get some better images when I next visit my father. I was in a bit of a hurry and in fact the movement was running which makes the image less clear.

It's also engraved with my great grandfather's name and the company he worked for in 1911. So it's very much of sentimental value.

Edited by omx5o
Link to comment
Share on other sites

2 minutes ago, oldhippy said:

wis 1971, how can you see all that detail? I can hardly see the pallets. :D

If you click on the picture it will bring a larger window up and you can zoom in

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Many thanks for your advice (being borne in mind at present) & offer Dell. When I was given the clock the plastic anchor was loose on the arbour (it had split at the 'hole') &, after repairing this, I have been trying to determine whether the spindle (pin) should be perpendicular when the pallet is sitting on a flat surface; or whether, when installed, its L-R extremes (or alternatively its tick & tock points) should lie at equal angles from the vertical when moved with spring absent. I can get the clock to run but in every such configuration the top block has to be turned anti-clockwise (from above) by quite a bit in order to be 'in beat' & it always runs fast (despite the pendulum being set to as slow as possible). This makes me wonder if there is any particular feature of/fault in a torsion spring clock which determines which turn direction (if any) is necessary to get it 'in beat'; & whether there would be a different set of settings that would get it running nearer to time at somewhere around the mid timing/inertia position which would then allow tweaking of the fast/slow setting.
    • Now this has happened I bet China or India just to name two will start to produce none genuine parts.  I did. But idiot Boris Johnson failed miserably in his negotiations. The E U stitched up the UK like a kipper. Nigel Farage  offered his help but big head Boris declined. So this is why we are in this mess all because Johnson wasn't clever enough.  
    • Hands up all those who voted to leave the EU 😂, oopsie.  UK has just signed the Hague convention, next year that will provide cross border clout to British courts.
    • Ive heard about that oil before for the lever pins. I found it easy to work on , it didn't have a whole lot of pivot wear but i bit sloppy on the lever cock, i think you have to live with what you have or bin it. Stiff to wind and set ?  Not a cannon pinion issue that has no friction thats made up further back and if I remember the barrel drives the hour wheel. No problem on this one .Let me know when you start it as i have another that donated to this one, i can work alongside you with it, two heads are better than one. 
×
×
  • Create New...