Jump to content

Clock Quiz Made it a bit Easier


oldhippy

Recommended Posts

Here are 5 clock movements. I want the type of movement and the country that they are from. Be careful and study the movements because this is hard. One or two are not so obvious as you might think. With no answers it looks as if it is to hard. So to help you here is the list of countries. France, America, UK, Austria and Germany.

A.jpg

B.jpg

C.jpg

D.jpg

E.jpg

Link to comment
Share on other sites

Well these are my thoughts guesses,

1, I'm not quite sure about this one but I think its a cuckoo clock movement which would I think make it the German movement

2, first thought's it looks like a french striking movement in layout but with none of the quality so maybe a German Hermle but they are mostly floating balance escapements, after a bit of reading I think this is a American Seth Thomas 8 day time and strike movement

3 Austrian or maybe German  striking Vienna regulator movement

4, This is a English Turret clock

5, French Morbier striking clock

Link to comment
Share on other sites

wise1971 you are correct. clockboy you need to know your clock movements, go to the back of the class.:D

A             fusee cuckoo clock          Germany              

B             Seth Thomas                      American

C             Vienna Regulator            Austrian              

D             Turret clock                        UK

E              Morbier Comtoise           French

Looks like i made it to easy.

 

Link to comment
Share on other sites

Well I wouldn't of got any of those correct other than I guessed number 2 looked like a French striking clock, but the quality wasn't there, so was obviously made elsewhere copying a French clock.

I do like it when you post quizzes like this as I do learn quite a bit

Link to comment
Share on other sites

19 minutes ago, Tmuir said:

Well I wouldn't of got any of those correct other than I guessed number 2 looked like a French striking clock, but the quality wasn't there, so was obviously made elsewhere copying a French clock.

I do like it when you post quizzes like this as I do learn quite a bit

That's nice to know. I'll make up another soon.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • nevenbekriev- You nailed it with your description of me and my reaction when the clock started ticking again. I am a newbie.  I love the sound and idea of mechanical clocks but the idea of owning one and trying to keep them running has never appealed to me. My wife bought this one and an antique German wall clock.  When I looked into having someone repair them for me, the universal response was "it's really expensive to work on them, you should just replace the movement". So, I had nothing to lose, I started researching them and opened them up. The wife is happy because she hears the sound of the clocks again. But I have gone down the "accuracy" rabbit hole. In the vertical position, the balance wheel was not floating. It was sitting on the bottom of the frame. I adjusted the lower spring collet and got it floating. It easily passed the 270 degree 3 to 5 minute oscillation test. It took 8 minutes for the wheel to completely stop moving.  I put it the unit back in the movement and checked the safety pin. It does not touch the safety roller anywhere in +/-270 degrees rotation from neutral position. But the amplitude of the rotation with the spring fully wound is weak based on what you are saying. It rotates +/-90 degrees from the neutral position.  No, I did not take the movement completely apart.  That seemed way outside my skill set at the time. There is a reason I became an electrical engineer and not a mechanical engineer. I am much more comfortable with moving electrons than tiny moving metal parts. Will I do it in the long run? Anything can happen. I don't seem to be able to let it go.
    • Isn't that the same guy who told Zelenskyy to escalate the war with Russia/Putin when they already had a peace deal? 2 years later and we have half a million young Ukranian boys dead. He doesn't seem very clever...
    • Thanks guys.  quick question. For automatic movement, particularly this one. can I power down the main spring by pushing this rachet down?  i've gotten pretty used to SW210 and powering down a manual movement. But so far i've only been waiting for the auto movement to run out of juice before opening the case.     
    • @Murks the problem you have mate is most watch cases out there to buy are for Seiko NH3X, ETA 2824 and maybe Myota 8XXX movements, oh also the big ETA 6978/9 movements which the dials start around 28.5mm. You might find one on a Google search but I suspect your main chance will be buying cheap quartz ladies watches and hopefully find one of the right size and condition that is acceptable. 😞   Tom
    • The anchor pin should be perpendicular when the anchor is sat on a flat surface and if you post a close up picture of the backplate I will be able to tell you the correct torsion spring , running fast or slow is usually wrong Torsion spring. Here is a video from my YouTube channel showing how I set the beat  
×
×
  • Create New...