Jump to content

Junk evaluation


Recommended Posts

Hello all. I searched for a topic on junk evaluation, but could find none.

I just joined Mark’s course, and in the excitement of learning, asked a local watch repairer for a few junk movements, so I could practise a bit before receiving my chinese clone. But to my surprise, i got two working watches, and some fancy junk. My question regards the memosail, the working ones and the pocket omega. Is it possible that the repairer gave something he should keep? Should I return these?

The list:

VIP memosail 17 jewels

Citizen cronograph automatic 23 jewels

Omega pocket

 

Working movements:

 

Vedeor 17 rubis incabloc (nothing on google)

Orient automatic 21 jewels ee599c05f6de0a1b0ea40ab6766b0fad.jpg

 

Link to comment
Share on other sites

Hello all. I searched for a topic on junk evaluation, but could find none.
I just joined Mark’s course, and in the excitement of learning, asked a local watch repairer for a few junk movements, so I could practise a bit before receiving my chinese clone. But to my surprise, i got two working watches, and some fancy junk. My question regards the memosail, the working ones and the pocket omega. Is it possible that the repairer gave something he should keep? Should I return these?
The list:
VIP memosail 17 jewels
Citizen cronograph automatic 23 jewels
Omega pocket
 
Working movements:
 
Vedeor 17 rubis incabloc (nothing on google)
Orient automatic 21 jewels ee599c05f6de0a1b0ea40ab6766b0fad.jpg&key=07500ec76fd47f5bae6e16a40a445463eceb04990984b18d3131e90fbafe1c9e
 


c254b6a03aa1e024a466e8bb0852ed9e.jpg
Link to comment
Share on other sites

The memosail is a high-end watch and some parts are not available. the dial and hands will probably be of value to someone.

The omega pocketwatch is nice but they're not really worth big bucks. They dont have balance protection so the balance is probably broken.

I would save the citizen for late once you've gotten some practice on simpler stuff.

The Orient is a good starter watch.. better than most chinese clones.

Not sure of the vedeor but should have a jewelled escapement and this would be a good starter watch, especially if it has an Incabloc shockprotection.

Don't feel bad about the fact the dealer may have given you a valuable watch, he's a professional (or should be) and should know better. The usual reason for orphaned movements is 1)the shop replaced a non-runner with another working movement or 2)the case was gold and that was sold for scrap. My guess is (1) for your bare movements like the Citizen and Memosail.

Another scenario is the older watch repair guy is no longer around and the new guy has no use for these things.

My personal experience, after checking the movement of a watch that's sent to me for service, I have sometimes found that the watch is not repairable or would cost to much to repair. After telling the owner the news some have opted not to repair but have later come back after having sourced a similar watch/movement and requested me to do the transplant. They usually have no interest in the original unusable movement so it goes in my part stash.

Good luck and have fun!

Anilv

  • Like 2
Link to comment
Share on other sites

The memosail is a high-end watch and some parts are not available. the dial and hands will probably be of value to someone.
The omega pocketwatch is nice but they're not really worth big bucks. They dont have balance protection so the balance is probably broken.
I would save the citizen for late once you've gotten some practice on simpler stuff.
The Orient is a good starter watch.. better than most chinese clones.
Not sure of the vedeor but should have a jewelled escapement and this would be a good starter watch, especially if it has an Incabloc shockprotection.
Don't feel bad about the fact the dealer may have given you a valuable watch, he's a professional (or should be) and should know better. The usual reason for orphaned movements is 1)the shop replaced a non-runner with another working movement or 2)the case was gold and that was sold for scrap. My guess is (1) for your bare movements like the Citizen and Memosail.
Another scenario is the older watch repair guy is no longer around and the new guy has no use for these things.
My personal experience, after checking the movement of a watch that's sent to me for service, I have sometimes found that the watch is not repairable or would cost to much to repair. After telling the owner the news some have opted not to repair but have later come back after having sourced a similar watch/movement and requested me to do the transplant. They usually have no interest in the original unusable movement so it goes in my part stash.
Good luck and have fun!
Anilv

Thank you Anilv. I took your advice and started with the orient. It is funny how monstrous the eta 6497 look in comparison.
Having a lot of fun. Nothing lost or broken yet.:)
  • Like 1
Link to comment
Share on other sites

I agree regarding that Memosail. Very cool piece that I’d like to add to my collection some day. Parts are quite hard to get but there are plenty of good runners out there. I’d hold that I reserve with The chronograph for later. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I dont think mine is. Its an idea to have them all in one place if possible, then a quick screenshot will have them saved. Unless anyone has any other ideas of how to reconnect 
    • My email address is in my profile, feel free all to drop me a quick hello. 
    • I have an Enfield mantel clock with a broken mounting lug (see photos). Does anyone have any suggestions about the best way to proceed?
    • Thanks VWatchie! I did spot your walkthrough thank you. And you are spot on about the movements too!   Nick
    • Yup watchie you are entirely on my wavelength with this , you actually said what i was hinting at, what if something happens to mark ? Will someone be able to take over ? Its not that long ago that the forum was down and Mark had to step in and fix it. And you are right a wealth of information that does not exist as a whole anywhere on the planet will be lost. Can that be archived elsewhere? It would be an absolute shame if the plug was pulled without warning, i would like to think Mark wouldn't do that to us. And like i said in my first post i talk about things other folk might be affraid to.  So lets not skirt around anything. It might be nice to have a place where we can all drop our emails just in case so we always have that contact. Can you make that happen  Old Hippy ?  i kind of think of you as the pops of the forum 🙂
×
×
  • Create New...