Jump to content

Recommended Posts

Having just finished Mark Lovick's excellent "Maintenance Servicing" course, I'm now reassembling a Poljot 2614.2H movement. Unlike the the Unitas 6498 in the course, this movement has a friction point which I don't know how to releate to. It's certainly not easy to formulate a correct question, so I'll back it up with a couple of pictures.

Should any oil be applied to the friction point between the jewel (on the inner/intermediate bridge) and the fourth wheel pinion, and if so what kind of oil?

40339659600_493662d783_o.jpg40339659770_e60076d992_o.jpg

Link to comment
Share on other sites

A spot of 9010 just under the pinion and also on the wider portion of the pivot.

"Should any oil be applied to the friction point between the jewel (on the inner/intermediate bridge) and the fourth wheel pinion, and if so what kind of oil?"
Yes... D5 - as always, not too much. bbf9c04b3cb73985860782b2f3673fed.jpg

Sent from my SM-G950F using Tapatalk

  • Like 3
  • Thanks 1
Link to comment
Share on other sites



×
×
  • Create New...