Jump to content

Screwdrivers Choices


Recommended Posts

47 minutes ago, jdm said:

I don't know if mine are VOH or not, but they say made in France. They're not as expensive as Bergeon.

JC


Going by price (three times as much) VOH is supposed to be "better" than Bergeon. But I'll probably never know first hand emoji1.png

 

 

Link to comment
Share on other sites

VOH seem to be one of the best out there, but price wise, -- and during my searches -- I can't seem to tell the difference in price from, let's say Bergeon et al, plus or minus a couple of dollars (not much), so I didn't get them. The French option is more in accordance to a quality product that is at the same time a much less expensive option. I still went the Bergeon way but also own a couple of French ones and I'm not complaining at all.

Link to comment
Share on other sites

  • 1 month later...

I have ordered recently a couple of Beregeon 30080  screwdrivers from Cousins. To my surprise I found them quite different from those I use from many years. First of all they do not fit to my Bergeon rotating stand. The small ones have now handles of larger diameter. They are also heavier than the former ones.

Bergeon 30080 new design.JPG

Old design at the left, new design at the right

Surprisingly it makes quite a difference in using them, particularly the small ones .

It seems that Bergeon has silently redesigned  its most popular screwdrivers in order reduce the manufacturing costs. Now there are only three sizes of handles depending on size of blades instead of six in former design. Be aware of that.  You need the new stand and time for getting used to this new design.

Link to comment
Share on other sites

I looked through several Beregeon distributors. They still have old and new design. Since there is no way to distinguish old from new by part number (they all are 30080), it may happen that when you place the order for few different sizes, you will get mix of old and new. That will be really confusing. 

Link to comment
Share on other sites

  • 2 months later...

On Friday I received my new set of Horotec screwdrivers.

I'm very impressed with the quality of them, but the real point of this post is to let people know that if they are after new Screwdrivers that Eternal tools

https://www.eternaltools.com/

has them for £27 cheaper than Cousins if you live outside the EU.

I'm assuming its because they have old stock, but if you are after new screwdrivers you may want to visit the above website to grab some before they sell out and I'm guessing at that point their price will go up.

I don't think this breaches the forum rules mentioning a website that has the best price for a certain tool, but if it does happy for the post to be deleted. Cousins gets most of my money, but Eternal tools was definitely the best place to buy my new screwdrivers from.

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...

If those a Indian, run, do not walk away... I bought a set of Indian screwdrivers and I knew better...Why I did it I don't know. I still have them, and when I am depressed and need a bit of cheering up, I bring them out and compare them to my Bergeons. Soon I am laughing so hard I am no longer depressed. :)

It's all good to save a buck where possible...Indian screwdrivers are not the place to save.

Ron

Link to comment
Share on other sites

You can always buy Horotec or Bergeon replacement blades for less expensive holders. Check out Otto Frei and Esslinger to get a price range on these items. If your budget will permit you can pick up a set of Horotecs with the ball bearing holders for about $150.00. I have seen the prices of screwdrivers  range from less than $10.00 to hundreds of dollars for a set. The number one problem with the less expensive sets is the blades are too soft. A high quality replacement blade will correct that and save you some money.

david 

Edited by david
Link to comment
Share on other sites

There are a lot of postings about Bergeon drivers of poor quality recently, however Bergeon makes at least 4 different types, perhaps more.

I have india made, Anchor brand drivers and they work perfectly, after more than 1 year I've replaced only one blade because I had damaged it myself.

Link to comment
Share on other sites

One of my favorite watch restoration guru's is Steffen Pahlow. The screwdrivers he uses looks like he found them in a salvage bin at a pawn shop. I don't  think any two of his screwdrivers match. The important thing is the screwdrivers either turn the screws in and out or they do not. I have several sets, some are considered to be high quality and others are not. It is probably more about what you are used to then anything else. I have removed many screws with my el cheapo's and they work fine. I have removed screws with my Horotec's and they work fine. The Horotec's are extremely well made and do not have any wobbly components. The blades are perfectly centered in the holders and are high quality blades. That said, there is nothing wrong with the less expensive screwdrivers. The are not as beautifully made but they work fine.

david

  • Like 2
Link to comment
Share on other sites

  • 1 month later...

I am interested in buying this set of screwdrivers from Watchtool.co.uk, but i have read that the website has many bad reviews. I really like the screwdrivers and base for the price and I haven't been able to find it elsewhere online. Has anyone ever had a problem with this site shipping to the U.S.? or has anyone ever purchased these screwdrivers and has a good review? Any input is appreciated.

http://www.watchtool.co.uk/switzerland-189770-screwdrivers-stand-p-7762.html

 

  • Like 1
Link to comment
Share on other sites

I don't know if it would be worth it to buy from UK when you have to pay shipping to US. Have you tried Esslinger?  They have watch tools at a reasonable price and they are in the US.  I've bought from them many times and I've always been satisfied.  Just look up Esslinger.com

Hope this helps.

Shilrey

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • in general this shouldn't be any change. but in general questions like this it be nice to know the specifics of the watch in other words how was it performing before it was cased up and what is it doing now.
    • just as a reminder this watch is a Swatch group product. This will bring up a problem like spare parts and technical information. that I found some links to some information on when I talk about your watch and some of the technical and basically your watch is equivalent to 2834-2 for which I'm attaching the technical sheets. But equivalent does not mean exactly the same you want to do a search on the group for C07 as we discussed this watch before including the technical differences how it's supposed to be regulated and basically because it's watch group there is no parts availability. https://calibercorner.com/eta-caliber-c07-xxx/   https://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/ https://www.watchuseek.com/threads/h-10-movement-details.4636991/ eta CT_2834-2_FDE_481857_15.pdf
    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
×
×
  • Create New...