Jump to content

Hello from Australia

TimeLord

By TimeLord
in Introduce Yourself Here

 Share

Recommended Posts

TimeLord New Member

TimeLord

Posted
Posted

Hello everyone :) I'm from Victoria in Australia and have have fallen in love with watch repairing :) I'm very new to the hobby and hoping to someday make a living out of it. Slowly working my way through Mark's online courses and setting up my workbench while acquiring tools as I go. Got my Seagull ST36 ETA/6497 clone all set - just waiting on my screwdrivers! Received a Wostok 2409A, Poljot 2616.1H Automatic and a couple of seagull ST19 VENUS175 clones ready to service when I get more experienced/confident :). If I love the work enough (which I am sure I will) I will be looking to enroll through BHI in UK for their technician course. I am lucky in that even though I live very remotely I have access to a clock and watch maker  who has been very generous with his knowledge and has even allowed me to come into his workshop and muck around on my days off and pester him with questions. So very happy to be here and looking forward to meeting everyone and learning as much as I can.

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

Welcome to this friendly forum. You are very lucky to have someone to ask and learn from.

I am a great believer of the hands on approach. You can only learn so much from books. As they, say there is nothing like getting your hands dirty.  

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      I dont understand why a patreon membership would have limited places ??
    • clockboy
      Hi all

      By clockboy · Posted

      Welcome to the forum, enjoy. It’s highly unlikely you will be able to purchase a new bezel look on eBay for a pulsar watch for repair to find a bezel.
    • JohnR725
      Balance spring fell out of regulator pin.

      By JohnR725 · Posted

      just one little minor reminder here this isn't your normal balance wheel.  pages 17 and 18 are what you really want to be looking at. normally studs don't turn but this watch has the etachron system designed for lots of adjustment. Personally I would try to rotate the stud back to where it's supposed to be. If you're lucky you didn't actually bend it at the stud it just looks really bad as the stud has been rotated grossly out of position.. I think things will look a lot better if you put the hairspring back where it's supposed to be by rotating the stud. it's hard to tell if you actually did bend it at the stud or not we won't know until you rotate the stud back more or less where it's supposed to be. Then you want to pay attention to the manual of how to put the hairspring back in the regulator pins because yes they rotate also and they rotated specific directions otherwise bad things will happen to your hairspring. so initially you can open up the regulator as wide as it can go and don't worry about closing it until thing everything is right then you can close them a little bit
    • oldhippy
      Is this a 'hack' ?

      By oldhippy · Posted

      I need to see photos of the whole movement before I comment. 
    • swiss2k
      Omega cal. 565 - low amplitude

      By swiss2k · Posted

      Hi @Jon, so, from one extreme to another the beat error is 0.1(min.pos) to 0.2(msx.pos), and as you mentioned the rate does up and down dramatically. Also checked the position of the collet, and the collet is not central to the jewel on the balance cock. Balance moves freely, per my understanding.   So, after 24h the ampl. fell down by approx 20 deg, which I would assume is expected. After adjusting the endshake I believe I gained around +10 deg. of balance movement. Which is great, and overall the balance is not at 220'ish deg.   What I did next, some might think is non-orthodox, but was wort a try. I too the mainspring out, checked again for endshake and if the pin moves freely, and cleaned everything. Usually when installing the mainspring I would use some barrel grease on the barrel walls, install the spring and put a 2-3 drops of D-5 oil on top of the wounded spring and in the places where the arbor sits. This time I took the spring and applied a ultra this coat of Molykote Dx paste on the whole spring, before installing it in to the barrel, and added some oil to the arbor as usual.  The result improved, at a full wound the balance produces about 230-237 deg. @JohnR725 I'm getting closer to 300 😃   What I am noticing, there is a fluctuation in amplitude. With time it would rise and drop about total 8-10 deg in an interval about 2 minutes. I assumed this ruled out the power transfer from the barrel itself. So I took the gear train out, cleaned and lubed. 
×
×
  • Create New...