Jump to content

Hello from the coast of Rhode Island

JoeM

By JoeM
in Introduce Yourself Here

 Share

Recommended Posts

JoeM Member

JoeM

Posted
Posted

I'm Joe and completely new to this possible hobby.  Nearing the end of my career as an executive in the business world and contemplating what I may like to do to fill my time.  I play guitar and sing in a rock band and have built my own amplifiers, done my own repairs, etc.  I also spent several years when I was in my early-20's tying flies and got pretty good at it.  Thus, I believe I have a reasonable mechanical aptitude and good fine motor skills :-)

My grandfather was an excellent mechanic and repaired clocks as a hobby - my grandparents had a house full of antique American clocks that he'd fixed up.

I've been buying a few odd watches here and there and now I'm reading "Watch Repair for Beginners: An Illustrated How-To Guide for the Beginner Watch Repairer" by Harold C. Kelly and watching service/repair videos on YouTube.

Getting ready to take the plunge and purchase a few of the basic tools needed to open and look inside the inexpensive watches I've got hanging around.  So I'll be looking for the topic concerning basic tools right away.

Glad to be here and looking forward to meeting all of you in the forum.

 

Link to comment
Share on other sites
Tudor Distinguished Member

Tudor

Posted
Posted

Welcome Joe!

I'm reasonably local, in CT. A bit further down the rabbit hole than you, but sounds like we have similar backgrounds (I made custom guitars for a few years and have been playing Drums for over 40)

Feel free to reach out! This is a great community here. Very helpful!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • rossjackson01
      Intro

      By rossjackson01 · Posted

      Welcome my friend. 
    • rossjackson01
      Help please.

      By rossjackson01 · Posted

      Been there. Worn that Tshirt.  'ping'. Hands and knees. Nothing. Nada. 20 minutes? Ha! I found it 7 month later. How? Well, after advice from a member, I invested in a £4 UV light torch.  Hands and knees looking for a 'ping' from a Sekonda, found them both within 30 seconds. UV makes the jewel shine. easy peasy. Could have taken longer. Just lucky on the location of the search. Hope this helps.
    • Rixy
      Broken lug

      By Rixy · Posted

      Thanks Dell. I thought about silver soldering. Have never done it but would like to give it a go. Do you think to put flux on the butted joint then run the solder in or to maybe brace it with a piece of scrap spring steel?
    • rossjackson01
      Without Our Forum

      By rossjackson01 · Posted

      Never and others. Yes, like you I do spend a fair amount of time reading the contents of this forum. I find it better that any other. Clear, lucid, no Prima Donas, and most of all an easy access without adverts. All thanks to Mark. God bless you mate. You give so much to many of us. What if? No Mark? Hypothetically. A forum. I did run a forum for a few years. Really enjoyed it, but became so engrossed that it did affect my health. I gave to to others to run. Not been back. It was very successful and rivalled a number of large paying sites. No adverts, no others but me. I did ask and listen to members comments and it worked well.    Costs Having a domain name, £10 annually.  Register the site with a forum company, free. Build the site using the forum company guide lines, free. It looked and ran almost the same a Mark's. All the same facilities. The cost was only £5 per month, but counted visits (views). If I recall, it was that price for 5,000 views. Each extra 5,000 views increased the price by £2 per month. Success was my own personal undoing. From £5 per month initially, it rose to £60 a month and looked like increasing. This was 10 years ago. I could not afford that, and asked it anyone would like to take over and someone did. I would assume that this is the price that Mark is funding for us all. His return is our continued comments on the internet about his course, and the fact that many of the big names on YouTube mention him as their Tutor. Those of us who have done, and are still using, his course, benefit. In comparison to other courses, I can't believe how cheap it is, and the value is exceptional. It is the structure that gives the value. Long may Mark reign. Ross  
    • TheQuietMan
      Help please.

      By TheQuietMan · Posted

      Hi all, total newbie to watchmaking and I've had a bit of a mishap. Just completing level 2 and was doing ok, but I was just on the last part of the reassembly of my ST3620 when the balance end stone shot across the room, just as I was trying to see if I had put the correct amount of oil between it and the balance end, aarrrgh! Been on my hands and knees combing the carpet for 20mins looking for it but to no avail. Does anybody know where I can get a replacement from and what to look for please?? Thanks.
×
×
  • Create New...