Jump to content

English lever pocket watch

antonyh
 Share

Recommended Posts

antonyh WRT Addict

antonyh

Posted
Posted (edited)

I put a post  a while ago about  this pocket watch I had got from Ebay,  bought a a spares or repair,  they should had simply said, " it's dead ,it's never going to go again", and I wouldn't have got it.

 

But I did, it's one of the H.williamson  English lever pocket watchs, so I liked it, as I said,  I'd  had a plan , I had another movement,  I had another dial, I found in a box, one of the black military dials.

Put it in the case, I was quite happy with it,,,,, but it just was not quite right, , the case numbers did not match up ' obviously ' with  the dial.

So I just had to have another look at the original movement. 

Just on the dial  side plate everything was broken ,botched or missing,  from the broken steel screws in the plate , broken  pallet guard screws, end stone's,  jewell  holes,  missing parts to the winding. 

Well a month  and a half later, it's running, new pallets, balance  wheel,  escape  wheel,  new crown, new hands,,,,,OMG....

Movement.jpg

Edited by antonyh
Picture
  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Without Our Forum

      By RichardHarris123 · Posted

      In the meantime whilst awaiting a better plan, please drop me a quick hello on my email. 
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      I looked at it like this, I've built a lot of stuff in my time, building structures and furniture,those are my creations and they will still be here way way after I'm gone. Traditional watchmakers felt the need to pass their knowledge on, ideas that they created . I assume with them as it is with me, leaving their mark on the earth, a way of being remembered. This creation of Mark's has brought thousands of people together to pass their knowledge around,  ideas that will continue to be used for lifetimes. Ideas that should continue to be procured. If for whatever reason the forum ceased to exist, not quite like Ranfft's, that didn't disappear but much less usable. Then that is sad, such a massive loss of communication between good people and a wealth of knowledge lost. There should be something in place for when that happens which could be next week, next year or in 10 years. Might not be a topical subject for a lot of folk or boardering on controversy, i did say i talk about stuff other people dont. But if you dont talk about it and something happens then you've lost it and you ain't gonna fix it .
    • Waggy
      Without Our Forum

      By Waggy · Posted

      I've remained silent on this thread, and at the risk of upsetting everyone, the thing that worries me the most the the apparent absence of Mark. The moderators do a great job and the members also pitch in, and the site seems to run itself, but it is a concern for the future of this forum when the owner is absent for all intents and purposes. Like many of the comments above I would hate to log in one day and things be closed down as I rely on this site for ideas and knowledge and also cheer me up. maybe the Moderators could reach out to him, assuming he does not read this thread, and express our concerns and let us know the plans going forward? some kind of WRT ark
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      That was the exact reason for me starting this thread watchie. Still we haven't worked out how the regulars are going to hook up if it goes tits up. I honestly think something should be arranged to stay in contact, we all help each other so much. 
    • Neverenoughwatches
      Setting lever spring

      By Neverenoughwatches · Posted

      Yeah ive watched that a few times before,  i couldnt find my old school dividers to scribe it up 😅 Yep thats the guy i bought a roll from . Thanks Nicklesilver that answers that perfectly and more or less what i thought an experiment over time would prove . The jumper arm is quite thick along its length, i left it that way intentionally, i thought the original was probably very thin, i didnt see that it was already missing. Setting isn't particularly stiff as such just positive, i still need to take it out and polish where it mates with the stem release. 
×
×
  • Create New...